* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
* Add TXB0102DCU and TXB0102YZP in library/texas
* add alias TXB0102DCT to TXB0102DCU (library/texas.lib)
* move TXB0102DCT alias to new component library/texas.lib
* Fix FPFilter TXB0102*
* Add USB2514B/Bi into library/microchip
* Add footprint fields TXB0102*
* fix name footprint for USB2514B/Bi
* added Arduino UNO R2/R3 + Leonardo symbols
* Fix Footprint name TXB0102DCT
* Fix wrong pin number for EN.
* Fix aligment, set power pins to correct type.
* Add doc.
* Fixed symbol line width (KLC 4.2).
* Fixed missing wildcard in footprint filter (KLC 4.12).
* Added PAM8302A
* Added first draft of BTS50080-1TEA
* Fixed KLC errors (apart from EC01 numeral required in TAB pin number).
* Added alias for BTS50080-1TEB.
* Started work on LPC1111FHN33/101. Shortened PIO pin names. Reduced size of symbol. Set symbol line width.
* Changing "/" to "-" in symbol name.
* Fixed default footprint and footprint filter. Passes KLC.
* Tidied up description and keyword fields. Updated datasheet URL.
* Removed duplicate symbols ahead of adding aliases to LPC1111FHN33-101.
* Adding aliases.
* Aliases added. Symbol passes KLC apart from (incorrect) warning about Vss pin at bottom of symbol.
* Add PM8834
* fixed field text sizes
* Added TPL9201
* Added STEP and WRL files.
* Added remaining aliases.
* Fix to compliant with KCL
* Fixed footprint filter error in CM1213A-01SO.
* Fixed footprint filter error in NPC45560.
* Fix pin position and symbol style errors in NPC45560.
* NPC45560: fixed KLC errors in pin position and type, symbol style and alias documentation.
Remaining errors are pin type of multiple Vout. Need to resolve KLC vs ERC conflict.
* Renamed component as NPC45560-H with one alias NPC45560-L.
* Fix to compliant with KCL
* some KLC fixes
* Adding muRata NMA SC series
* Adding muRata NMA DC series
* aligning 3D models to packages3D pull 31
https://github.com/KiCad/packages3D/pull/31
* Add pin 2 as NC and remove DFN footprint
* Changed pin number from "TAB" to "6".
* Added more aliases to LPC1111FHN33-101.
* empty datasheet-field USB2514B/Bi
* fix KLC violations
* Add LMC6482
* fix KLC rules
* spearate PM8834M from PM8834
* Added LPC1113FBD48-301 with aliases. Removed LPC1113FBD48/301 LPC1113FBD48/302 LPC1114FBD48/301 LPC1114FBD48/302
* Added models.
* Correcting NMA DC/DC symbol, removing unexisting pins
* Updated footprint details.
* TPL9201:Moved all pins to 100mils grid and added wildcard to footprint
* Updated some pin positions
* Added DRV8860 Relay driver
* Added MPL115A (NXP, Freescale).
* + added datasheet for i82C54_PLCC
* * pins D0..D7 of i82C54_PLCC made bidirectional
* + added the not connected pins of i82C54_PLCC
* * don't use the inverted graphic style for pins that have overbars in the i82C54_PLCC
* + add footprint filters for i82C54_PLCC
* + set the footprint of i82C54_PLCC
* + added 82C54 (DIP package)
* * update 82C54 description name as per the datasheet; removed part name from the description
* + added 8253 and 8254 (aliases of 82C54)
* + added 8237 DMA controller
* Fixed footprint nickname.
* Fixed footprint name.
* creation of +3V8 Power symbol
* Correcting NMA (footprint field, 0V electrical type)
* Omron relays (#1)
* Update OMRON Relays for KLC compliance
Added description, datasheet, and keywords. Changed reference designator
from "RL" to IEEE standard "K".
* Revert "Update OMRON Relays for KLC compliance"
This reverts commit 8c0d7bd6e5f117f39e956a25dc532cf3995bbab9.
* Omron relays
Added description, datasheet, and keywords. Changed reference designator
from "RL" to IEEE standard "K".
* Omron relays (#2)
* Update OMRON Relays for KLC compliance
Added description, datasheet, and keywords. Changed reference designator
from "RL" to IEEE standard "K".
* Revert "Update OMRON Relays for KLC compliance"
This reverts commit 8c0d7bd6e5f117f39e956a25dc532cf3995bbab9.
* Omron relays
Added description, datasheet, and keywords. Changed reference designator
from "RL" to IEEE standard "K".
* Cleaned out DOS line endings
* Fixed out of place component definition
* fixed several KLC issues in relays.lib + changed all remaining REFDES from RL to K (Standard!)
* Added lib-table entries for Relays_SMD lib
* Added STEP and WRL files for 54722 and 55560 series connectors.
* Removed files with incorrect file name. Need to regenerate.
* Added files with correct filename.
* * rework relays.lib to match https://github.com/KiCad/Relays_THT.pretty/pull/16 (also rename of 3D symbols)
* added some relays for which footprints existed, but no symbol
* Correcting NMA FPFilters
* aligning 3D models to packages3D pull #3522450f81a6
* Added STEP and WRL for MPL115A1 sensor.
* Added pin 1 marker
* Added symbol and aliases.
* Upated footprint name.
* Shortened pins and moved labels.
* Fixed footprint filter.
* aligning library to packages3d pull #30https://github.com/KiCad/packages3D/pull/30
* Shortened pins and moved labels.
* added MINI-DIN-3...-8 connector symbols
* KLC-fixes
* added series of DIN-connectors (+deleted old version)
* reworked audio jack and DC jack symbols + added missing variants
* renamed to lower-cases
* KLC fixes
* klc fix
* fied pinout of DIN-5_180degree
* renamed to Audio-Jack-N + added Audio-Jack-5
* added additional naming schemes to description/keywords
* - replace JACK_TRS_6PINS with new version Audio-Jack-3_3Switches
- some renames
- more/better keywords
* - pin-type of FAULT should be Open-Collector
- footprint should be Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm
- FPFilter should be TSSOP*4.4x5mm*Pitch0.65mm*
- added a variant of this symbol with an additional pin 17 "PAD" next to GND that links to the footprint Housings_SSOP:TSSOP-16-1EP_4.4x5mm_Pitch0.65mm
* - Moved the GND-pins 100mil lower so the text does not intersect
- Elongated all pins to 150mil or 200mil so the pin-numbers do not interesct with the negation-circles (e.g. pin 14)
- Moved pin 18 "5Vout" to the top of the symbol
- Renamed to TPL9201_TSSOP and add , TSSOP-20 to the description and set footprint to Housings_SSOP:HTSSOP-20-1EP_4.4x6.5mm_Pitch0.65mm_ThermalPad and the FPFilter to HTSSOP*4.4x6.5mm*Pitch0.65mm*ThermalPad*
- Added a pin 21 "PAD" for the thermal pad (next to GND)
* - Removed TPL9201
* Added LPC1112FHI33-102 and six aliases. Removed one alias from LPC1111FHN33-101 that had been incorrectly included in that device; it belongs in this one.
* Added test versions for DPAK 3D models. NOT FOR PR.
* Junk
* Removed superseded models.
* added new MELF&MiniMELF&MicroMELF package 3D models for Resistors&Diodes
