2016-11-07 21:44:39 +01:00
EESchema-DOCLIB Version 2.0
2013-06-04 15:27:52 +02:00
#
$CMP 68000D
D Microprocesseur bus 16 bits
K MPRO
$ENDCMP
#
$CMP 68008D
D Microprocesseur bus 8 bits
K MPRO
$ENDCMP
#
$CMP 68010D
D Microprocesseur bus 16 bits
K MPRO
$ENDCMP
#
$CMP 6821
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Peripheral Interface Adapter 1MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/6821.pdf
2013-06-04 15:27:52 +02:00
$ENDCMP
#
$CMP 6822
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Peripheral Interface Adapter 1MHz, DIP-40
K PIA
F http://pdf1.alldatasheet.com/datasheet-pdf/view/135452/MOTOROLA/MC6822.html
2013-06-04 15:27:52 +02:00
$ENDCMP
#
$CMP 68230
D PIT Interface parallele et Timer
K MPRO
$ENDCMP
#
$CMP 68681
D Interface serie 2 voies + 1 port parallele
K MPRO
$ENDCMP
#
$CMP 68901_PLCC
D Interface parallele
K MPRO
$ENDCMP
#
$CMP 68HC11
D Microprocesseur monoboitier
K MPRO
$ENDCMP
#
2016-11-07 21:44:39 +01:00
$CMP 68HC11F1
D Microprocesseur monoboitier (version PLCC 68 pins)
2013-06-04 15:27:52 +02:00
K MPRO
$ENDCMP
#
2016-11-07 21:44:39 +01:00
$CMP 68HC11_PLCC
D Microprocesseur monoboitier (version PLCC 52 pins)
2013-06-04 15:27:52 +02:00
K MPRO
$ENDCMP
#
$CMP 68HC711_PLCC
D Microprocesseur monoboitier Reprom interne (version PLCC 44 pins)
K MPRO
$ENDCMP
#
$CMP DSP56301
D DSP with PCI bus interface
K DSP PCI
$ENDCMP
#
$CMP MC13192
2016-09-05 14:50:07 +02:00
D Zigbee controller
2013-06-04 15:27:52 +02:00
K ZIGBEE
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MC6800
D 8-Bit Microprocessing unit 1.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68A00L.pdf
$ENDCMP
#
2016-11-06 13:57:27 +01:00
$CMP MC68000FN
D Microprocessor, 16-bit bus
K MPRO
F http://www.nxp.com/files/32bit/doc/ref_manual/MC68000UM.pdf
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MC6809
D 8-Bit Microprocessing unit 1.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC6809E
D 8-Bit Microprocessing unit 1.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC68332
D MCU 32 bit, PQFP-132
K MCU 32 bit
F http://pdf.datasheetcatalog.com/datasheet/motorola/SPAKMC332AVFC20.pdf
$ENDCMP
#
$CMP MC6840
D Peripheral Interface Adapter 1MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6840.pdf
$ENDCMP
#
$CMP MC6843
D Floppy Disc Controller, DIP-40
K FDC
F http://www.datasheetarchive.com/pdf/download.php?id=355f4f5379c550317997643252fd5cac1bb08e&type=M&query=MC6843P
$ENDCMP
#
$CMP MC6844
D Direct Memory Access Controller 1MHz, DIP-40
K Direct Memory Access Controller
F http://pdf.datasheetcatalog.com/datasheets/560/501527_DS.pdf
$ENDCMP
#
$CMP MC6845
D CRT Controller 1MHz, DIP-40
K CRT controller
F http://pdf.datasheetcatalog.com/datasheet_pdf/motorola/MC6845L_and_MC6845P.pdf
$ENDCMP
#
$CMP MC6850
D Asynchronous Communications Interface Adapter 1MHz, DIP-40
K ACIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6850.pdf
$ENDCMP
#
$CMP MC68A00
D 8-Bit Microprocessing unit 1.5MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68A00L.pdf
$ENDCMP
#
$CMP MC68A09
D 8-Bit Microprocessing unit 1.5MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC68A09E
D 8-Bit Microprocessing unit 1.5MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC68A21
D Peripheral Interface Adapter 1.5MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/6821.pdf
$ENDCMP
#
$CMP MC68A40
D Peripheral Interface Adapter 1.5MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6840.pdf
$ENDCMP
#
$CMP MC68A44
D Direct Memory Access Controller 1.5MHz, DIP-40
K Direct Memory Access Controller
F http://pdf.datasheetcatalog.com/datasheets/560/501527_DS.pdf
$ENDCMP
#
$CMP MC68A45
D CRT Controller 1.5MHz, DIP-40
K CRT controller
F http://pdf.datasheetcatalog.com/datasheet_pdf/motorola/MC6845L_and_MC6845P.pdf
$ENDCMP
#
$CMP MC68A50
D Asynchronous Communications Interface Adapter 1.5MHz, DIP-40
K ACIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6850.pdf
$ENDCMP
#
$CMP MC68B00
D 8-Bit Microprocessing unit 2.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68A00L.pdf
$ENDCMP
#
$CMP MC68B09
D 8-Bit Microprocessing unit 2.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC68B09E
D 8-Bit Microprocessing unit 2.0MHz, DIP-40
K MCU
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC68B09S.pdf
$ENDCMP
#
$CMP MC68B21
D Peripheral Interface Adapter 2MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/6821.pdf
$ENDCMP
#
$CMP MC68B40
D Peripheral Interface Adapter 2MHz, DIP-40
K PIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6840.pdf
$ENDCMP
#
$CMP MC68B44
D Direct Memory Access Controller 2MHz, DIP-40
K Direct Memory Access Controller
F http://pdf.datasheetcatalog.com/datasheets/560/501527_DS.pdf
$ENDCMP
#
$CMP MC68B45
D CRT Controller 2MHz, DIP-40
K CRT controller
F http://pdf.datasheetcatalog.com/datasheet_pdf/motorola/MC6845L_and_MC6845P.pdf
$ENDCMP
#
$CMP MC68B50
D Asynchronous Communications Interface Adapter 2MHz, DIP-40
K ACIA
F http://pdf.datasheetcatalog.com/datasheet/motorola/MC6850.pdf
$ENDCMP
#
2013-06-04 15:27:52 +02:00
$CMP MC68HC812A4
D micropro. Motorola 68HC12 112 pins
$ENDCMP
#
$CMP MC68HC912
D HCMC68HC12 a flash eprom interne
$ENDCMP
#
$CMP MCF5213-LQFP100
D Coldfire with SRAM and Flash Eprom - LQFP100 package
K COLDFIRE
$ENDCMP
#
$CMP MCF5282
D Coldfire with SRAM and Flash Eprom
K COLDFIRE
$ENDCMP
#
$CMP MCF5407
D Coldfire
K COLDFIRE
$ENDCMP
#
$CMP MMC2114CFCPU
D Motorola M*CORE upro 100 pins
F motorola/mmc2114.pdf
$ENDCMP
#
$CMP MPC8641D
D Freescale PowerPC E600 core, package BGA1023 pins pitch 1mm
K POWERPC
$ENDCMP
#
$CMP P4080-BGA1295
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
D QorIQ P4080 Communications Processor, BGA-1295
K Communications Processor
F https://www.nxp.com/jp/products/microcontrollers-and-processors/power-architecture-processors/qoriq-platforms/p-series/qoriq-p4080-p4040-p4081-multicore-communications-processors:P4080?&tab=Documentation_Tab&linkline=Data-Sheet
2013-06-04 15:27:52 +02:00
$ENDCMP
#
#End Doc Library
