Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
|
|
|
EESchema-LIBRARY Version 2.3
|
|
|
|
#encoding utf-8
|
|
|
|
#
|
|
|
|
# A4950E
|
|
|
|
#
|
|
|
|
DEF A4950E U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -300 350 50 H V L CNN
|
|
|
|
F1 "A4950E" 200 350 50 H V L CNN
|
|
|
|
F2 "Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm" 0 -550 50 H I C CNN
|
|
|
|
F3 "" -300 350 50 H I C CNN
|
|
|
|
ALIAS A4950K A4953_LJ
|
|
|
|
$FPLIST
|
|
|
|
SOIC-*1EP*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -300 300 300 -300 0 1 10 f
|
|
|
|
X GND 1 0 -400 100 U 50 50 1 1 W
|
|
|
|
X IN2 2 -400 100 100 R 50 50 1 1 I
|
|
|
|
X IN1 3 -400 200 100 R 50 50 1 1 I
|
|
|
|
X VREF 4 -400 -100 100 R 50 50 1 1 P
|
|
|
|
X VBB 5 0 400 100 D 50 50 1 1 W
|
|
|
|
X OUT1 6 400 200 100 L 50 50 1 1 w
|
|
|
|
X LSS 7 400 0 100 L 50 50 1 1 W
|
|
|
|
X OUT2 8 400 100 100 L 50 50 1 1 w
|
|
|
|
X PAD 9 100 -400 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# A4952_LY
|
|
|
|
#
|
|
|
|
DEF A4952_LY U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -300 450 50 H V L CNN
|
|
|
|
F1 "A4952_LY" 200 450 50 H V L CNN
|
|
|
|
F2 "Housings_SSOP:MSOP-10-1EP_3x3mm_Pitch0.5mm" 0 -600 50 H I C CNN
|
|
|
|
F3 "" -300 450 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
MSOP*1EP*3x3mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -300 400 300 -400 0 1 10 f
|
|
|
|
X ~FLTn 1 400 -100 100 L 50 50 1 1 O
|
|
|
|
X RTRY 2 -400 -100 100 R 50 50 1 1 I
|
|
|
|
X IN2 3 -400 200 100 R 50 50 1 1 I
|
|
|
|
X IN1 4 -400 300 100 R 50 50 1 1 I
|
|
|
|
X VREF 5 -400 0 100 R 50 50 1 1 P
|
|
|
|
X VBB 6 0 500 100 D 50 50 1 1 W
|
|
|
|
X OUT1 7 400 300 100 L 50 50 1 1 w
|
|
|
|
X LSS 8 400 100 100 L 50 50 1 1 W
|
|
|
|
X OUT2 9 400 200 100 L 50 50 1 1 w
|
|
|
|
X GND 10 0 -500 100 U 50 50 1 1 W
|
|
|
|
X PAD 11 100 -500 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# DRV8308
|
|
|
|
#
|
|
|
|
DEF DRV8308 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -700 1450 50 H V L CNN
|
|
|
|
F1 "DRV8308" -700 -850 50 H V L CNN
|
|
|
|
F2 "Housings_DFN_QFN:QFN-40-1EP_6x6mm_Pitch0.5mm_TI_PVQFN-N40" 50 -1000 50 H I C CNN
|
|
|
|
F3 "" -700 1450 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
QFN*1EP*6x6mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
T 0 650 -100 50 0 0 0 Hall~Sensors Normal 0 R C
|
|
|
|
T 0 675 1000 50 0 0 0 Phase~U Normal 0 R C
|
|
|
|
T 0 675 600 50 0 0 0 Phase~V Normal 0 R C
|
|
|
|
T 0 675 200 50 0 0 0 Phase~W Normal 0 R C
|
|
|
|
S -700 1400 700 -800 0 1 10 f
|
|
|
|
X UHP 1 800 -200 100 L 50 50 1 1 I
|
|
|
|
X UHN 2 800 -300 100 L 50 50 1 1 I
|
|
|
|
X VHP 3 800 -400 100 L 50 50 1 1 I
|
|
|
|
X VHN 4 800 -500 100 L 50 50 1 1 I
|
|
|
|
X WHP 5 800 -600 100 L 50 50 1 1 I
|
|
|
|
X WHN 6 800 -700 100 L 50 50 1 1 I
|
|
|
|
X VSW 7 100 1500 100 D 50 50 1 1 w
|
|
|
|
X FGFB 8 -800 -200 100 R 50 50 1 1 O
|
|
|
|
X FGINN_TACH 9 -800 -300 100 R 50 50 1 1 I
|
|
|
|
X FGINP 10 -800 -400 100 R 50 50 1 1 B
|
|
|
|
X BRAKE 20 -800 300 100 R 50 50 1 1 I
|
|
|
|
X CP1 30 -800 1300 100 R 50 50 1 1 P
|
|
|
|
X WLSG 40 800 300 100 L 50 50 1 1 O
|
|
|
|
X SCLK 11 -800 1000 100 R 50 50 1 1 I
|
|
|
|
X DIR 21 -800 100 100 R 50 50 1 1 I
|
|
|
|
X ISEN 31 800 0 100 L 50 50 1 1 I
|
|
|
|
X GND 41 100 -900 100 U 50 50 1 1 W
|
|
|
|
X SCS 12 -800 900 100 R 50 50 1 1 I
|
|
|
|
X ENABLE 22 -800 0 100 R 50 50 1 1 I
|
|
|
|
X UHSG 32 800 1300 100 L 50 50 1 1 O
|
|
|
|
X SMODE 13 -800 600 100 R 50 50 1 1 I
|
|
|
|
X RESET 23 -800 400 100 R 50 50 1 1 I
|
|
|
|
X U 33 800 1200 100 L 50 50 1 1 I
|
|
|
|
X SDATAI 14 -800 800 100 R 50 50 1 1 I
|
|
|
|
X VREG 24 200 1500 100 D 50 50 1 1 w
|
|
|
|
X ULSG 34 800 1100 100 L 50 50 1 1 O
|
|
|
|
X SDATAO 15 -800 700 100 R 50 50 1 1 O
|
|
|
|
X VINT 25 -300 1500 100 D 50 50 1 1 P
|
|
|
|
X VHSG 35 800 900 100 L 50 50 1 1 O
|
|
|
|
X FGOUT 16 -800 -500 100 R 50 50 1 1 O
|
|
|
|
X GND 26 -100 -900 100 U 50 50 1 1 W
|
|
|
|
X V 36 800 800 100 L 50 50 1 1 I
|
|
|
|
X ~FAULTn 17 -800 -600 100 R 50 50 1 1 O
|
|
|
|
X VM 27 0 1500 100 D 50 50 1 1 W
|
|
|
|
X VLSG 37 800 700 100 L 50 50 1 1 O
|
|
|
|
X ~LOCKn 18 -800 -700 100 R 50 50 1 1 O
|
|
|
|
X VCP 28 -200 1500 100 D 50 50 1 1 P
|
|
|
|
X WHSG 38 800 500 100 L 50 50 1 1 O
|
|
|
|
X CLKIN 19 -800 200 100 R 50 50 1 1 I
|
|
|
|
X CP2 29 -800 1200 100 R 50 50 1 1 P
|
|
|
|
X W 39 800 400 100 L 50 50 1 1 I
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# DRV8711
|
|
|
|
#
|
|
|
|
DEF DRV8711 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" 0 1325 50 H V C CNN
|
|
|
|
F1 "DRV8711" 0 1250 50 H V C CNN
|
|
|
|
F2 "" 0 -1250 50 H I C CNN
|
|
|
|
F3 "" 0 0 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
HTSSOP-38
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -600 1200 600 -1200 0 1 10 f
|
|
|
|
X CP1 1 -700 1100 100 R 50 50 1 1 B
|
|
|
|
X CP2 2 -700 1000 100 R 50 50 1 1 B
|
|
|
|
X VCP 3 -700 900 100 R 50 50 1 1 B
|
|
|
|
X VM 4 -700 800 100 R 50 50 1 1 W
|
|
|
|
X GND 5 700 -800 100 L 50 50 1 1 W
|
|
|
|
X V5 6 -700 600 100 R 50 50 1 1 w
|
|
|
|
X VINT 7 -700 500 100 R 50 50 1 1 W
|
|
|
|
X SLEEPn 8 -700 300 100 R 50 50 1 1 I
|
|
|
|
X RESET 9 -700 200 100 R 50 50 1 1 I
|
|
|
|
X STEP/AIN1 10 -700 100 100 R 50 50 1 1 I
|
|
|
|
X BEMF 20 -700 -1100 100 R 50 50 1 1 O
|
|
|
|
X AOUT2 30 700 400 100 L 50 50 1 1 O
|
|
|
|
X DIR/AIN2 11 -700 0 100 R 50 50 1 1 I
|
|
|
|
X BOUT2 21 700 -500 100 L 50 50 1 1 O
|
|
|
|
X A2HS 31 700 500 100 L 50 50 1 1 O
|
|
|
|
X BIN1 12 -700 -100 100 R 50 50 1 1 I
|
|
|
|
X B2HS 22 700 -400 100 L 50 50 1 1 O
|
|
|
|
X A2LS 32 700 600 100 L 50 50 1 1 O
|
|
|
|
X BIN2 13 -700 -200 100 R 50 50 1 1 I
|
|
|
|
X B2LS 23 700 -300 100 L 50 50 1 1 O
|
|
|
|
X AISENN 33 700 700 100 L 50 50 1 1 I
|
|
|
|
X SCLK 14 -700 -400 100 R 50 50 1 1 I
|
|
|
|
X BISENN 24 700 -200 100 L 50 50 1 1 I
|
|
|
|
X AISENP 34 700 800 100 L 50 50 1 1 I
|
|
|
|
X SDATI 15 -700 -500 100 R 50 50 1 1 I
|
|
|
|
X BISENP 25 700 -100 100 L 50 50 1 1 I
|
|
|
|
X A1LS 35 700 900 100 L 50 50 1 1 O
|
|
|
|
X SCS 16 -700 -600 100 R 50 50 1 1 I
|
|
|
|
X B1LS 26 700 0 100 L 50 50 1 1 O
|
|
|
|
X A1HS 36 700 1000 100 L 50 50 1 1 O
|
|
|
|
X SDATO 17 -700 -700 100 R 50 50 1 1 O
|
|
|
|
X B1HS 27 700 100 100 L 50 50 1 1 O
|
|
|
|
X AOUT1 37 700 1100 100 L 50 50 1 1 O
|
|
|
|
X FAULTn 18 -700 -900 100 R 50 50 1 1 O
|
|
|
|
X BOUT1 28 700 200 100 L 50 50 1 1 O
|
|
|
|
X GND 38 700 -1000 100 L 50 50 1 1 W
|
|
|
|
X STALLn/BEMFVn 19 -700 -1000 100 R 50 50 1 1 O
|
|
|
|
X GND 29 700 -900 100 L 50 50 1 1 W
|
|
|
|
X GND 39 700 -700 100 L 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# DRV8833PW
|
|
|
|
#
|
|
|
|
DEF DRV8833PW U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -150 650 50 H V C CNN
|
|
|
|
F1 "DRV8833PW" -150 550 50 H V C CNN
|
|
|
|
F2 "Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm" 450 450 50 H I L CNN
|
|
|
|
F3 "" -150 550 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
TSSOP-16*4.4x5mm*Pitch0.65mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 500 400 -500 0 1 10 f
|
|
|
|
X nSLEEP 1 -600 400 200 R 50 50 1 1 I
|
|
|
|
X AOUT1 2 600 -100 200 L 50 50 1 1 w
|
|
|
|
X AISEN 3 -600 200 200 R 50 50 1 1 B
|
|
|
|
X AOUT2 4 600 -200 200 L 50 50 1 1 w
|
|
|
|
X BOUT2 5 600 -400 200 L 50 50 1 1 w
|
|
|
|
X BISEN 6 -600 100 200 R 50 50 1 1 B
|
|
|
|
X BOUT1 7 600 -300 200 L 50 50 1 1 w
|
|
|
|
X nFAULT 8 600 100 200 L 50 50 1 1 C
|
|
|
|
X BIN1 9 -600 -300 200 R 50 50 1 1 I
|
|
|
|
X BIN2 10 -600 -400 200 R 50 50 1 1 I
|
|
|
|
X VCP 11 -600 300 200 R 50 50 1 1 B
|
|
|
|
X VM 12 300 700 200 D 50 50 1 1 W
|
|
|
|
X GND 13 0 -700 200 U 50 50 1 1 W
|
|
|
|
X VINT 14 200 700 200 D 50 50 1 1 W
|
|
|
|
X AIN2 15 -600 -200 200 R 50 50 1 1 I
|
|
|
|
X AIN1 16 -600 -100 200 R 50 50 1 1 I
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# DRV8833PWP
|
|
|
|
#
|
|
|
|
DEF DRV8833PWP U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -150 650 50 H V C CNN
|
|
|
|
F1 "DRV8833PWP" -150 550 50 H V C CNN
|
|
|
|
F2 "Housings_SSOP:HTSSOP-16-1EP_4.4x5mm_Pitch0.65mm" 450 450 50 H I L CNN
|
|
|
|
F3 "" -150 550 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
HTSSOP-16-1EP*4.4x5mm*Pitch0.65mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 500 400 -500 0 1 10 f
|
|
|
|
X nSLEEP 1 -600 400 200 R 50 50 1 1 I
|
|
|
|
X AOUT1 2 600 -100 200 L 50 50 1 1 w
|
|
|
|
X AISEN 3 -600 200 200 R 50 50 1 1 B
|
|
|
|
X AOUT2 4 600 -200 200 L 50 50 1 1 w
|
|
|
|
X BOUT2 5 600 -400 200 L 50 50 1 1 w
|
|
|
|
X BISEN 6 -600 100 200 R 50 50 1 1 B
|
|
|
|
X BOUT1 7 600 -300 200 L 50 50 1 1 w
|
|
|
|
X nFAULT 8 600 100 200 L 50 50 1 1 C
|
|
|
|
X BIN1 9 -600 -300 200 R 50 50 1 1 I
|
|
|
|
X BIN2 10 -600 -400 200 R 50 50 1 1 I
|
|
|
|
X VCP 11 -600 300 200 R 50 50 1 1 B
|
|
|
|
X VM 12 300 700 200 D 50 50 1 1 W
|
|
|
|
X GND 13 0 -700 200 U 50 50 1 1 W
|
|
|
|
X VINT 14 200 700 200 D 50 50 1 1 W
|
|
|
|
X AIN2 15 -600 -200 200 R 50 50 1 1 I
|
|
|
|
X AIN1 16 -600 -100 200 R 50 50 1 1 I
|
|
|
|
X GND(PPAD) 17 -100 -700 200 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# DRV8833RTY
|
|
|
|
#
|
|
|
|
DEF DRV8833RTY U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -150 650 50 H V C CNN
|
|
|
|
F1 "DRV8833RTY" -150 550 50 H V C CNN
|
|
|
|
F2 "Housings_DFN_QFN:WQFN-16-1EP_4x4mm_Pitch0.65mm" 450 450 50 H I L CNN
|
|
|
|
F3 "" -150 550 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
WQFN-16-1EP*4x4mm*Pitch0.65mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 500 400 -500 0 1 10 f
|
|
|
|
X AISEN 1 -600 200 200 R 50 50 1 1 B
|
|
|
|
X AOUT2 2 600 -200 200 L 50 50 1 1 w
|
|
|
|
X BOUT2 3 600 -400 200 L 50 50 1 1 w
|
|
|
|
X BISEN 4 -600 100 200 R 50 50 1 1 B
|
|
|
|
X BOUT1 5 600 -300 200 L 50 50 1 1 w
|
|
|
|
X nFAULT 6 600 100 200 L 50 50 1 1 C
|
|
|
|
X BIN1 7 -600 -300 200 R 50 50 1 1 I
|
|
|
|
X BIN2 8 -600 -400 200 R 50 50 1 1 I
|
|
|
|
X VCP 9 -600 300 200 R 50 50 1 1 B
|
|
|
|
X VM 10 300 700 200 D 50 50 1 1 W
|
|
|
|
X GND 11 0 -700 200 U 50 50 1 1 W
|
|
|
|
X VINT 12 200 700 200 D 50 50 1 1 W
|
|
|
|
X AIN2 13 -600 -200 200 R 50 50 1 1 I
|
|
|
|
X AIN1 14 -600 -100 200 R 50 50 1 1 I
|
|
|
|
X nSLEEP 15 -600 400 200 R 50 50 1 1 I
|
|
|
|
X AOUT1 16 600 -100 200 L 50 50 1 1 w
|
|
|
|
X GND(PPAD) 17 -100 -700 200 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# L293
|
|
|
|
#
|
|
|
|
DEF L293 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -200 1025 50 H V R CNN
|
|
|
|
F1 "L293" -200 950 50 H V R CNN
|
|
|
|
F2 "Housings_DIP:DIP-16_W7.62mm" 250 -750 50 H I L CNN
|
|
|
|
F3 "" -300 700 50 H I C CNN
|
|
|
|
ALIAS L293D
|
|
|
|
$FPLIST
|
|
|
|
DIP*W7.62mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
C -90 -270 10 0 1 0 F
|
|
|
|
C -90 325 10 0 1 0 F
|
|
|
|
S -400 900 400 -700 0 1 10 f
|
|
|
|
P 2 0 1 0 -250 -195 -50 -195 N
|
|
|
|
P 2 0 1 0 -250 5 -125 5 N
|
|
|
|
P 2 0 1 0 -250 400 -50 400 N
|
|
|
|
P 2 0 1 0 -250 600 -125 600 N
|
|
|
|
P 2 0 1 0 -50 5 250 5 N
|
|
|
|
P 2 0 1 0 -50 600 250 600 N
|
|
|
|
P 2 0 1 0 25 -195 250 -195 N
|
|
|
|
P 2 0 1 0 25 400 250 400 N
|
|
|
|
P 3 0 1 0 -90 -270 -10 -270 -10 -220 N
|
|
|
|
P 3 0 1 0 -90 -25 -90 -400 -140 -400 N
|
|
|
|
P 3 0 1 0 -90 325 -10 325 -10 375 N
|
|
|
|
P 3 0 1 0 -90 570 -90 200 -140 200 N
|
|
|
|
P 4 0 1 0 -125 55 -125 -45 -50 5 -125 55 N
|
|
|
|
P 4 0 1 0 -125 650 -125 550 -50 600 -125 650 N
|
|
|
|
P 4 0 1 0 -50 -145 -50 -245 25 -195 -50 -145 N
|
|
|
|
P 4 0 1 0 -50 450 -50 350 25 400 -50 450 N
|
|
|
|
X EN1,2 1 -500 200 100 R 50 50 1 1 I
|
|
|
|
X 1A 2 -500 600 100 R 50 50 1 1 I
|
|
|
|
X 1Y 3 500 600 100 L 50 50 1 1 O
|
|
|
|
X GND 4 -200 -800 100 U 50 50 1 1 W
|
|
|
|
X GND 5 -100 -800 100 U 50 50 1 1 W
|
|
|
|
X 2Y 6 500 400 100 L 50 50 1 1 O
|
|
|
|
X 2A 7 -500 400 100 R 50 50 1 1 I
|
|
|
|
X VCC2 8 100 1000 100 D 50 50 1 1 W
|
|
|
|
X EN3,4 9 -500 -400 100 R 50 50 1 1 I
|
|
|
|
X 3A 10 -500 0 100 R 50 50 1 1 I
|
|
|
|
X 3A 11 500 0 100 L 50 50 1 1 O
|
|
|
|
X GND 12 100 -800 100 U 50 50 1 1 W
|
|
|
|
X GND 13 200 -800 100 U 50 50 1 1 W
|
|
|
|
X 4Y 14 500 -200 100 L 50 50 1 1 O
|
|
|
|
X 4A 15 -500 -200 100 R 50 50 1 1 I
|
|
|
|
X VCC1 16 -100 1000 100 D 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# L297
|
|
|
|
#
|
|
|
|
DEF L297 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -250 750 50 H V C CNN
|
|
|
|
F1 "L297" -250 650 50 H V C CNN
|
|
|
|
F2 "" -250 650 50 H I C CNN
|
|
|
|
F3 "" -250 650 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
DIP*
|
|
|
|
SO*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
X RESET 20 -700 100 200 R 50 50 1 0 I I
|
|
|
|
X CONTROL 11 -700 0 200 R 50 50 1 0 I
|
|
|
|
X Vs 12 200 800 200 D 50 50 1 0 W
|
|
|
|
X SENS2 13 -700 -300 200 R 50 50 1 0 I
|
|
|
|
X SENS1 14 -700 -200 200 R 50 50 1 0 I
|
|
|
|
X Vref 15 300 800 200 D 50 50 1 0 I
|
|
|
|
X OSC 16 -700 -400 200 R 50 50 1 0 I
|
|
|
|
X CW 17 -700 300 200 R 50 50 1 0 I
|
|
|
|
X CLOCK 18 -700 400 200 R 50 50 1 0 I I
|
|
|
|
X HALF 19 -700 500 200 R 50 50 1 0 I
|
2017-11-21 23:33:13 +01:00
|
|
|
S -500 600 500 -600 0 1 10 f
|
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
|
|
|
X SYNC 1 -700 -500 200 R 50 50 1 1 B
|
|
|
|
X GND 2 0 -800 200 U 50 50 1 1 W
|
|
|
|
X HOME 3 700 -500 200 L 50 50 1 1 C
|
|
|
|
X A 4 700 300 200 L 50 50 1 1 O
|
|
|
|
X INH1 5 700 -200 200 L 50 50 1 1 O I
|
|
|
|
X B 6 700 200 200 L 50 50 1 1 O
|
|
|
|
X C 7 700 100 200 L 50 50 1 1 O
|
|
|
|
X INH2 8 700 -300 200 L 50 50 1 1 O I
|
|
|
|
X D 9 700 0 200 L 50 50 1 1 O
|
|
|
|
X ENABLE 10 -700 200 200 R 50 50 1 1 I
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# L298(H)N
|
|
|
|
#
|
|
|
|
DEF L298(H)N U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -75 725 50 H V R CNN
|
|
|
|
F1 "L298(H)N" -75 650 50 H V R CNN
|
|
|
|
F2 "TO_SOT_Packages_THT:TO-220-15_Vertical" 50 -650 50 H I L CNN
|
|
|
|
F3 "" 150 250 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
TO?220*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -500 600 500 -600 0 1 10 f
|
|
|
|
X SENSE_A 1 -300 -700 100 U 50 50 1 1 W
|
|
|
|
X OUT1 2 600 200 100 L 50 50 1 1 O
|
|
|
|
X OUT2 3 600 100 100 L 50 50 1 1 O
|
|
|
|
X Vs 4 100 700 100 D 50 50 1 1 W
|
|
|
|
X IN1 5 -600 500 100 R 50 50 1 1 I
|
|
|
|
X EnA 6 -600 300 100 R 50 50 1 1 I
|
|
|
|
X IN2 7 -600 400 100 R 50 50 1 1 I
|
|
|
|
X GND 8 0 -700 100 U 50 50 1 1 W
|
|
|
|
X Vss 9 0 700 100 D 50 50 1 1 W
|
|
|
|
X IN3 10 -600 100 100 R 50 50 1 1 I
|
|
|
|
X EnB 11 -600 -100 100 R 50 50 1 1 I
|
|
|
|
X IN4 12 -600 0 100 R 50 50 1 1 I
|
|
|
|
X OUT3 13 600 -100 100 L 50 50 1 1 O
|
|
|
|
X OUT4 14 600 -200 100 L 50 50 1 1 O
|
|
|
|
X SENSE_B 15 -200 -700 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# L298P
|
|
|
|
#
|
|
|
|
DEF L298P U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 650 50 H V C CNN
|
|
|
|
F1 "L298P" 400 -650 50 H V C CNN
|
|
|
|
F2 "" 150 250 50 H I C CNN
|
|
|
|
F3 "" 150 250 50 H I C CNN
|
|
|
|
DRAW
|
|
|
|
S -500 600 500 -600 0 1 10 f
|
|
|
|
X GND 1 -100 -700 100 U 50 50 1 1 W
|
|
|
|
X SENSE_A 2 -400 -700 100 U 50 50 1 1 W
|
|
|
|
X NC 3 600 500 100 L 50 50 1 1 N N
|
|
|
|
X OUT1 4 600 200 100 L 50 50 1 1 O
|
|
|
|
X OUT2 5 600 100 100 L 50 50 1 1 O
|
|
|
|
X Vs 6 100 700 100 D 50 50 1 1 W
|
|
|
|
X IN1 7 -600 500 100 R 50 50 1 1 I
|
|
|
|
X EnA 8 -600 300 100 R 50 50 1 1 I
|
|
|
|
X IN2 9 -600 400 100 R 50 50 1 1 I
|
|
|
|
X GND 10 0 -700 100 U 50 50 1 1 W
|
|
|
|
X GND 20 200 -700 100 U 50 50 1 1 W
|
|
|
|
X GND 11 100 -700 100 U 50 50 1 1 W
|
|
|
|
X Vss 12 0 700 100 D 50 50 1 1 W
|
|
|
|
X IN3 13 -600 100 100 R 50 50 1 1 I
|
|
|
|
X EnB 14 -600 -100 100 R 50 50 1 1 I
|
|
|
|
X IN4 15 -600 0 100 R 50 50 1 1 I
|
|
|
|
X OUT3 16 600 -100 100 L 50 50 1 1 O
|
|
|
|
X OUT4 17 600 -200 100 L 50 50 1 1 O
|
|
|
|
X NC 18 600 400 100 L 50 50 1 1 N N
|
|
|
|
X SENSE_B 19 -300 -700 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# PG001M
|
|
|
|
#
|
|
|
|
DEF PG001M U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 550 50 H V C CNN
|
|
|
|
F1 "PG001M" 300 -550 50 H V C CNN
|
|
|
|
F2 "" 0 -100 50 H I C CNN
|
|
|
|
F3 "" 0 -100 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
DIP*
|
|
|
|
PDIP*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S 500 -500 -500 500 0 1 0 N
|
|
|
|
X ~RESET~ 1 -600 400 100 R 50 50 1 1 I
|
|
|
|
X CLK_IN 2 -600 300 100 R 50 50 1 1 I
|
|
|
|
X ~CW~ 3 -600 200 100 R 50 50 1 1 I
|
|
|
|
X MSEL_1 6 -600 0 100 R 50 50 1 1 I
|
|
|
|
X MSEL_2 7 -600 -100 100 R 50 50 1 1 I
|
|
|
|
X GND 8 0 -600 100 U 50 50 1 1 W
|
|
|
|
X ~MONITOR~ 9 -600 -400 100 R 50 50 1 1 I
|
|
|
|
X DATA_B 10 600 0 100 L 50 50 1 1 O
|
|
|
|
X DATA_A 11 600 100 100 L 50 50 1 1 O
|
|
|
|
X ~STROBE~ 13 600 -100 100 L 50 50 1 1 O
|
|
|
|
X CLK_OUT 14 600 -200 100 L 50 50 1 1 O
|
|
|
|
X VECTOR 15 -600 -300 100 R 50 50 1 1 I
|
|
|
|
X Vdd 16 0 600 100 D 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# SLA7044M
|
|
|
|
#
|
|
|
|
DEF SLA7044M U 0 40 Y Y 2 F N
|
|
|
|
F0 "U" -300 450 50 H V C CNN
|
|
|
|
F1 "SLA7044M" 300 -450 50 H V C CNN
|
|
|
|
F2 "" 0 0 50 H I C CNN
|
|
|
|
F3 "" 0 0 50 H I C CNN
|
|
|
|
ALIAS SLA7042M
|
|
|
|
$FPLIST
|
|
|
|
SLA704XM
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 400 400 -400 0 1 0 N
|
|
|
|
X OUT 1 500 100 100 L 50 50 1 1 O
|
|
|
|
X ~STROBE~ 2 -500 100 100 R 50 50 1 1 I
|
|
|
|
X REF 3 -500 -100 100 R 50 50 1 1 I
|
|
|
|
X Vdd 4 0 500 100 D 50 50 1 1 W
|
|
|
|
X ~CLOCK~ 5 -500 200 100 R 50 50 1 1 I
|
|
|
|
X DATA 6 -500 300 100 R 50 50 1 1 I
|
|
|
|
X GND 7 0 -500 100 U 50 50 1 1 W
|
|
|
|
X ~OUT~ 8 500 0 100 L 50 50 1 1 O
|
|
|
|
X RS 9 -500 -300 100 R 50 50 1 1 I
|
|
|
|
X RS 10 -500 -300 100 R 50 50 2 1 I
|
|
|
|
X OUT 11 500 100 100 L 50 50 2 1 O
|
|
|
|
X GND 12 0 -500 100 U 50 50 2 1 W
|
|
|
|
X ~STROBE~ 13 -500 100 100 R 50 50 2 1 I
|
|
|
|
X REF 14 -500 -100 100 R 50 50 2 1 I
|
|
|
|
X Vdd 15 0 500 100 D 50 50 2 1 W
|
|
|
|
X ~CLOCK~ 16 -500 200 100 R 50 50 2 1 I
|
|
|
|
X DATA 17 -500 300 100 R 50 50 2 1 I
|
|
|
|
X ~OUT~ 18 500 0 100 L 50 50 2 1 O
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# SLA7070MPRT
|
|
|
|
#
|
|
|
|
DEF SLA7070MPRT U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 1000 50 H V C CNN
|
|
|
|
F1 "SLA7070MPRT" 300 -1000 50 H V C CNN
|
|
|
|
F2 "" 0 0 50 H I C CIN
|
|
|
|
F3 "" 0 0 50 H I C CNN
|
|
|
|
ALIAS SLA7071MPRT SLA7072MPRT SLA7073MPRT
|
|
|
|
$FPLIST
|
|
|
|
ZIP23
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -450 950 450 -950 0 1 10 f
|
|
|
|
X OUTA 1 600 800 150 L 50 50 1 1 O
|
|
|
|
X OUTA 2 600 700 150 L 50 50 1 1 O
|
|
|
|
X ~OUTA~ 3 600 600 150 L 50 50 1 1 O
|
|
|
|
X ~OUTA~ 4 600 500 150 L 50 50 1 1 O
|
|
|
|
X SENSE_A 5 600 -200 150 L 50 50 1 1 O
|
|
|
|
X N.C. 6 600 -800 150 L 50 50 1 1 N
|
|
|
|
X M1 7 -600 300 150 R 50 50 1 1 I
|
|
|
|
X M2 8 -600 200 150 R 50 50 1 1 I
|
|
|
|
X M3 9 -600 100 150 R 50 50 1 1 I
|
|
|
|
X CLOCK 10 -600 -100 150 R 50 50 1 1 I
|
|
|
|
X ~OUTB~ 20 600 300 150 L 50 50 1 1 O
|
|
|
|
X VBB 11 -100 1100 150 D 50 50 1 1 W
|
|
|
|
X ~OUTB~ 21 600 200 150 L 50 50 1 1 O
|
|
|
|
X GND 12 0 -1100 150 U 50 50 1 1 W
|
|
|
|
X OUTB 22 600 100 150 L 50 50 1 1 O
|
|
|
|
X REF/SLEEP1 13 -600 500 150 R 50 50 1 1 I
|
|
|
|
X OUTB 23 600 0 150 L 50 50 1 1 O
|
|
|
|
X VDD 14 100 1100 150 D 50 50 1 1 W
|
|
|
|
X RESET 15 -600 700 150 R 50 50 1 1 I
|
|
|
|
X CW/CCW 16 -600 -300 150 R 50 50 1 1 I
|
|
|
|
X SYNC 17 -600 -500 150 R 50 50 1 1 I
|
|
|
|
X FLAG 18 600 -600 150 L 50 50 1 1 O
|
|
|
|
X SENSE_B 19 600 -400 150 L 50 50 1 1 O
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# SLA7075MPRT
|
|
|
|
#
|
|
|
|
DEF SLA7075MPRT U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 1000 50 H V C CNN
|
|
|
|
F1 "SLA7075MPRT" 300 -1000 50 H V C CNN
|
|
|
|
F2 "" 0 0 50 H I C CIN
|
|
|
|
F3 "" 0 0 50 H I C CNN
|
|
|
|
ALIAS SLA7076MPRT SLA7077MPRT SLA7078MPRT
|
|
|
|
$FPLIST
|
|
|
|
ZIP23
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -450 950 450 -950 0 1 10 f
|
|
|
|
X OUTA 1 600 800 150 L 50 50 1 1 O
|
|
|
|
X OUTA 2 600 700 150 L 50 50 1 1 O
|
|
|
|
X ~OUTA~ 3 600 600 150 L 50 50 1 1 O
|
|
|
|
X ~OUTA~ 4 600 500 150 L 50 50 1 1 O
|
|
|
|
X SENSE_A 5 600 -200 150 L 50 50 1 1 O
|
|
|
|
X MO 6 600 -800 150 L 50 50 1 1 O
|
|
|
|
X M1 7 -600 300 150 R 50 50 1 1 I
|
|
|
|
X M2 8 -600 200 150 R 50 50 1 1 I
|
|
|
|
X M3 9 -600 100 150 R 50 50 1 1 I
|
|
|
|
X CLOCK 10 -600 -100 150 R 50 50 1 1 I
|
|
|
|
X ~OUTB~ 20 600 300 150 L 50 50 1 1 O
|
|
|
|
X VBB 11 -100 1100 150 D 50 50 1 1 W
|
|
|
|
X ~OUTB~ 21 600 200 150 L 50 50 1 1 O
|
|
|
|
X GND 12 0 -1100 150 U 50 50 1 1 W
|
|
|
|
X OUTB 22 600 100 150 L 50 50 1 1 O
|
|
|
|
X REF/SLEEP1 13 -600 500 150 R 50 50 1 1 I
|
|
|
|
X OUTB 23 600 0 150 L 50 50 1 1 O
|
|
|
|
X VDD 14 100 1100 150 D 50 50 1 1 W
|
|
|
|
X RESET 15 -600 700 150 R 50 50 1 1 I
|
|
|
|
X CW/CCW 16 -600 -300 150 R 50 50 1 1 I
|
|
|
|
X SYNC 17 -600 -500 150 R 50 50 1 1 I
|
|
|
|
X FLAG 18 600 -600 150 L 50 50 1 1 O
|
|
|
|
X SENSE_B 19 600 -400 150 L 50 50 1 1 O
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# STK672-040-E
|
|
|
|
#
|
|
|
|
DEF STK672-040-E U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 750 50 H V C CNN
|
|
|
|
F1 "STK672-040-E" 0 0 50 V V C CNN
|
|
|
|
F2 "" 150 50 50 H I C CNN
|
|
|
|
F3 "" 150 50 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
STK672-040-E
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -500 700 500 -700 0 1 0 N
|
|
|
|
X ~B~ 1 600 100 100 L 50 50 1 1 O
|
|
|
|
X B 2 600 200 100 L 50 50 1 1 O
|
|
|
|
X PG 3 0 -800 100 U 50 50 1 1 W
|
|
|
|
X PG 4 -100 -800 100 U 50 50 1 1 W
|
|
|
|
X ~A~ 5 600 300 100 L 50 50 1 1 O
|
|
|
|
X A 6 600 400 100 L 50 50 1 1 O
|
|
|
|
X VCC 7 0 800 100 D 50 50 1 1 W
|
|
|
|
X Vref 8 -600 -600 100 R 50 50 1 1 I
|
|
|
|
X M1 9 -600 600 100 R 50 50 1 1 I
|
|
|
|
X M2 10 -600 500 100 R 50 50 1 1 I
|
|
|
|
X MO1 20 600 -200 100 L 50 50 1 1 O
|
|
|
|
X M3 11 -600 400 100 R 50 50 1 1 I
|
|
|
|
X MO2 21 600 -300 100 L 50 50 1 1 O
|
|
|
|
X M4 12 -600 300 100 R 50 50 1 1 I
|
|
|
|
X SG 22 100 -800 100 U 50 50 1 1 W
|
|
|
|
X M5 13 -600 200 100 R 50 50 1 1 I
|
|
|
|
X CLK 14 -600 50 100 R 50 50 1 1 I
|
|
|
|
X CWB 15 -600 -50 100 R 50 50 1 1 I
|
|
|
|
X ~RESET~ 16 -600 -400 100 R 50 50 1 1 I
|
|
|
|
X RETURN 17 -600 -200 100 R 50 50 1 1 I
|
|
|
|
X ENABLE 18 -600 -300 100 R 50 50 1 1 I
|
|
|
|
X MOI 19 600 -100 100 L 50 50 1 1 O
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# STK672-080-E
|
|
|
|
#
|
|
|
|
DEF STK672-080-E U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -300 650 50 H V C CNN
|
|
|
|
F1 "STK672-080-E" 0 0 50 V V C CNN
|
|
|
|
F2 "" 50 -50 50 H I C CNN
|
|
|
|
F3 "" 50 -50 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
STK672-080-E
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 600 400 -600 0 1 0 N
|
|
|
|
X PG 1 0 -700 100 U 50 50 1 1 W
|
|
|
|
X BB 2 500 0 100 L 50 50 1 1 O
|
|
|
|
X B 3 500 100 100 L 50 50 1 1 O
|
|
|
|
X AB 4 500 200 100 L 50 50 1 1 O
|
|
|
|
X A 5 500 300 100 L 50 50 1 1 O
|
|
|
|
X VCC 6 0 700 100 D 50 50 1 1 W
|
|
|
|
X Vref 7 -500 -500 100 R 50 50 1 1 I
|
|
|
|
X M1 8 -500 500 100 R 50 50 1 1 I
|
|
|
|
X M2 9 -500 400 100 R 50 50 1 1 I
|
|
|
|
X CWB 10 -500 0 100 R 50 50 1 1 I
|
|
|
|
X CLOCK 11 -500 100 100 R 50 50 1 1 I
|
|
|
|
X M3 12 -500 300 100 R 50 50 1 1 I
|
|
|
|
X ~RESET~ 13 -500 -300 100 R 50 50 1 1 I
|
|
|
|
X MOI 14 500 -200 100 L 50 50 1 1 O
|
|
|
|
X ENABLE 15 -500 -200 100 R 50 50 1 1 I
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# STSPIN220
|
|
|
|
#
|
|
|
|
DEF STSPIN220 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 650 50 H V L CNN
|
|
|
|
F1 "STSPIN220" 200 650 50 H V L CNN
|
|
|
|
F2 "Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm" 200 750 50 H I L CNN
|
|
|
|
F3 "" 150 250 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
QFN*3x3mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 600 500 -600 0 1 10 f
|
|
|
|
X DIR 1 -500 500 100 R 50 50 1 1 I
|
|
|
|
X STCK 2 -500 400 100 R 50 50 1 1 I
|
|
|
|
X OUTA1 3 600 500 100 L 50 50 1 1 w
|
|
|
|
X SENSEA 4 600 300 100 L 50 50 1 1 w
|
|
|
|
X OUTA2 5 600 400 100 L 50 50 1 1 w
|
|
|
|
X VS 6 0 700 100 D 50 50 1 1 W
|
|
|
|
X GND 7 0 -700 100 U 50 50 1 1 W
|
|
|
|
X OUTB2 8 600 -100 100 L 50 50 1 1 w
|
|
|
|
X SENSEB 9 600 -200 100 L 50 50 1 1 w
|
|
|
|
X OUTB1 10 600 0 100 L 50 50 1 1 w
|
|
|
|
X REF 11 -500 -400 100 R 50 50 1 1 I
|
|
|
|
X TOFF 12 -500 -500 100 R 50 50 1 1 I
|
|
|
|
X EN/FLT 13 -500 -100 100 R 50 50 1 1 B
|
|
|
|
X STBY/RESET 14 -500 -200 100 R 50 50 1 1 I
|
|
|
|
X MODE2 15 -500 100 100 R 50 50 1 1 I
|
|
|
|
X MODE1 16 -500 200 100 R 50 50 1 1 I
|
|
|
|
X EPAD 17 100 -700 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# STSPIN230
|
|
|
|
#
|
|
|
|
DEF STSPIN230 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 650 50 H V L CNN
|
|
|
|
F1 "STSPIN230" 200 650 50 H V L CNN
|
|
|
|
F2 "Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm" 200 750 50 H I L CNN
|
|
|
|
F3 "" 150 250 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
QFN*3x3mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 600 500 -600 0 1 10 f
|
|
|
|
X INUH 1 -500 500 100 R 50 50 1 1 I
|
|
|
|
X INUL 2 -500 400 100 R 50 50 1 1 I
|
|
|
|
X OUTU 3 600 500 100 L 50 50 1 1 w
|
|
|
|
X SENSE 4 600 -300 100 L 50 50 1 1 I
|
|
|
|
X NC 5 200 -700 100 U 50 50 1 1 N N
|
|
|
|
X VS 6 0 700 100 D 50 50 1 1 W
|
|
|
|
X GND 7 0 -700 100 U 50 50 1 1 W
|
|
|
|
X OUTV 8 600 200 100 L 50 50 1 1 w
|
|
|
|
X SENSE 9 600 -400 100 L 50 50 1 1 I
|
|
|
|
X OUTW 10 600 -100 100 L 50 50 1 1 w
|
|
|
|
X INWL 11 -500 -200 100 R 50 50 1 1 I
|
|
|
|
X INWH 12 -500 -100 100 R 50 50 1 1 I
|
|
|
|
X EN/FLT 13 -500 -400 100 R 50 50 1 1 B
|
|
|
|
X STBY 14 -500 -500 100 R 50 50 1 1 I
|
|
|
|
X INVL 15 -500 100 100 R 50 50 1 1 I
|
|
|
|
X INVH 16 -500 200 100 R 50 50 1 1 I
|
|
|
|
X PAD 17 100 -700 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# STSPIN240
|
|
|
|
#
|
|
|
|
DEF STSPIN240 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" -400 650 50 H V L CNN
|
|
|
|
F1 "STSPIN240" 200 650 50 H V L CNN
|
|
|
|
F2 "Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm" 200 750 50 H I L CNN
|
|
|
|
F3 "" 150 250 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
QFN*3x3mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 600 500 -600 0 1 10 f
|
|
|
|
X PHA 1 -500 500 100 R 50 50 1 1 I
|
|
|
|
X PWMA 2 -500 400 100 R 50 50 1 1 I
|
|
|
|
X OUTA1 3 600 500 100 L 50 50 1 1 w
|
|
|
|
X SENSEA 4 600 300 100 L 50 50 1 1 w
|
|
|
|
X OUTA2 5 600 400 100 L 50 50 1 1 w
|
|
|
|
X VS 6 0 700 100 D 50 50 1 1 W
|
|
|
|
X GND 7 0 -700 100 U 50 50 1 1 W
|
|
|
|
X OUTB2 8 600 -100 100 L 50 50 1 1 w
|
|
|
|
X SENSEB 9 600 -200 100 L 50 50 1 1 w
|
|
|
|
X OUTB1 10 600 0 100 L 50 50 1 1 w
|
|
|
|
X REF 11 -500 -400 100 R 50 50 1 1 I
|
|
|
|
X TOFF 12 -500 -500 100 R 50 50 1 1 I
|
|
|
|
X EN/FLT 13 -500 -100 100 R 50 50 1 1 B
|
|
|
|
X STBY/RESET 14 -500 -200 100 R 50 50 1 1 I
|
|
|
|
X PHB 15 -500 200 100 R 50 50 1 1 I
|
|
|
|
X PWMB 16 -500 100 100 R 50 50 1 1 I
|
|
|
|
X EPAD 17 100 -700 100 U 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# TB6612FNG
|
|
|
|
#
|
|
|
|
DEF TB6612FNG U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" 450 700 50 H V L CNN
|
|
|
|
F1 "TB6612FNG" 450 600 50 H V L CNN
|
|
|
|
F2 "Housings_SSOP:SSOP-24_5.3x8.2mm_Pitch0.65mm" 450 600 50 H I C CNN
|
|
|
|
F3 "" 450 600 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
SSOP-24*5.3x8.2mm*Pitch0.65mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -400 800 400 -800 0 1 10 f
|
|
|
|
X AO1 1 600 400 200 L 50 50 1 1 w
|
|
|
|
X AO1 2 600 300 200 L 50 50 1 1 w
|
|
|
|
X PGND1 3 0 -1000 200 U 50 50 1 1 W
|
|
|
|
X PGND1 4 100 -1000 200 U 50 50 1 1 W
|
|
|
|
X AO2 5 600 200 200 L 50 50 1 1 w
|
|
|
|
X AO2 6 600 100 200 L 50 50 1 1 w
|
|
|
|
X BO2 7 600 -300 200 L 50 50 1 1 w
|
|
|
|
X BO2 8 600 -400 200 L 50 50 1 1 w
|
|
|
|
X PGND2 9 200 -1000 200 U 50 50 1 1 W
|
|
|
|
X PGND2 10 300 -1000 200 U 50 50 1 1 W
|
|
|
|
X VCC 20 -300 1000 200 D 50 50 1 1 W
|
|
|
|
X BO1 11 600 -100 200 L 50 50 1 1 w
|
|
|
|
X AIN1 21 -600 -100 200 R 50 50 1 1 I
|
|
|
|
X BO1 12 600 -200 200 L 50 50 1 1 w
|
|
|
|
X AIN2 22 -600 -200 200 R 50 50 1 1 I
|
|
|
|
X VM2 13 200 1000 200 D 50 50 1 1 W
|
|
|
|
X PWMA 23 -600 200 200 R 50 50 1 1 I
|
|
|
|
X VM3 14 300 1000 200 D 50 50 1 1 W
|
|
|
|
X VM1 24 100 1000 200 D 50 50 1 1 W
|
|
|
|
X PWMB 15 -600 100 200 R 50 50 1 1 I
|
|
|
|
X BIN2 16 -600 -400 200 R 50 50 1 1 I
|
|
|
|
X BIN1 17 -600 -300 200 R 50 50 1 1 I
|
|
|
|
X GND 18 -300 -1000 200 U 50 50 1 1 W
|
|
|
|
X STBY 19 -600 400 200 R 50 50 1 1 I I
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
|
|
|
# TMC262
|
|
|
|
#
|
|
|
|
DEF TMC262 U 0 40 Y Y 1 F N
|
|
|
|
F0 "U" 0 0 50 H V C CNN
|
|
|
|
F1 "TMC262" 0 100 50 H V C CNN
|
|
|
|
F2 "Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm" 0 -1400 50 H I C CNN
|
|
|
|
F3 "" 50 -1350 50 H I C CNN
|
|
|
|
$FPLIST
|
|
|
|
QFN*1EP*5x5mm*Pitch0.5mm*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
|
|
|
S -700 1200 700 -1200 0 1 10 f
|
|
|
|
X GND 1 200 -1300 100 U 50 50 1 1 W
|
|
|
|
X HA1 2 800 1100 100 L 50 50 1 1 O
|
|
|
|
X HA2 3 800 1000 100 L 50 50 1 1 O
|
|
|
|
X BMA2 4 800 700 100 L 50 50 1 1 I
|
|
|
|
X BMA1 5 800 800 100 L 50 50 1 1 I
|
|
|
|
X LA1 6 800 500 100 L 50 50 1 1 O
|
|
|
|
X LA2 7 800 400 100 L 50 50 1 1 O
|
|
|
|
X SRA 8 800 200 100 L 50 50 1 1 I
|
|
|
|
X 5VOUT 9 -300 1300 100 D 50 50 1 1 w
|
|
|
|
X SD0 10 -800 -100 100 R 50 50 1 1 T
|
|
|
|
X BMB1 20 800 -400 100 L 50 50 1 1 I
|
|
|
|
X DIR 30 -800 800 100 R 50 50 1 1 I
|
|
|
|
X SDI 11 -800 -200 100 R 50 50 1 1 I
|
|
|
|
X BMB2 21 800 -500 100 L 50 50 1 1 I
|
|
|
|
X STEP 31 -800 700 100 R 50 50 1 1 I
|
|
|
|
X SCK 12 -800 -300 100 R 50 50 1 1 I
|
|
|
|
X HB2 22 800 -800 100 L 50 50 1 1 O
|
|
|
|
X TST_MODE 32 -800 -800 100 R 50 50 1 1 I
|
|
|
|
X GND 13 100 -1300 100 U 50 50 1 1 W
|
|
|
|
X HB1 23 800 -700 100 L 50 50 1 1 O
|
|
|
|
X DIE_PAD 33 -100 -1300 100 U 50 50 1 1 I
|
|
|
|
X CSN 14 -800 -400 100 R 50 50 1 1 I
|
|
|
|
X VHS 24 100 1300 100 D 50 50 1 1 W
|
|
|
|
X ~ENN~ 15 -800 400 100 R 50 50 1 1 I
|
|
|
|
X VS 25 0 1300 100 D 50 50 1 1 W
|
|
|
|
X CLK 16 -800 200 100 R 50 50 1 1 I C
|
|
|
|
X TST_ANA 26 800 -1000 100 L 50 50 1 1 O
|
|
|
|
X SRB 17 800 100 100 L 50 50 1 1 I
|
|
|
|
X SG_TST 27 800 -1100 100 L 50 50 1 1 O
|
|
|
|
X LB2 18 800 -200 100 L 50 50 1 1 O
|
|
|
|
X GNDP 28 0 -1300 100 U 50 50 1 1 W
|
|
|
|
X LB1 19 800 -100 100 L 50 50 1 1 O
|
|
|
|
X VCC_IO 29 -100 1300 100 D 50 50 1 1 W
|
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
2017-11-21 23:33:13 +01:00
|
|
|
# VNH2SP30
|
|
|
|
#
|
|
|
|
DEF VNH2SP30 U 0 40 Y Y 1 F N
|
2017-11-21 23:49:45 +01:00
|
|
|
F0 "U" -500 1000 50 H V C CNN
|
|
|
|
F1 "VNH2SP30" 550 1000 50 H V C CNN
|
2017-11-25 02:01:38 +01:00
|
|
|
F2 "Housings_SSOP:ST_MultiPowerSO-30" 0 925 50 H I C CNN
|
2017-11-21 23:49:45 +01:00
|
|
|
F3 "" -500 1000 50 H I C CNN
|
2017-11-21 23:33:13 +01:00
|
|
|
$FPLIST
|
|
|
|
ST*MultiPowerSO*
|
|
|
|
$ENDFPLIST
|
|
|
|
DRAW
|
2017-11-25 02:01:38 +01:00
|
|
|
S -500 900 500 -900 1 1 10 f
|
|
|
|
X OUTA 1 700 100 200 L 50 50 1 1 P N
|
|
|
|
X NC 2 -700 0 200 R 50 50 1 1 N N
|
|
|
|
X VCC 3 0 1100 200 D 50 50 1 1 W
|
|
|
|
X NC 4 -700 -100 200 R 50 50 1 1 N N
|
|
|
|
X INA 5 -700 600 200 R 50 50 1 1 I
|
|
|
|
X EN/DIAA 6 700 800 200 L 50 50 1 1 O
|
|
|
|
X NC 7 -700 -200 200 R 50 50 1 1 N N
|
|
|
|
X PWM 8 -700 200 200 R 50 50 1 1 I
|
|
|
|
X CS 9 700 -600 200 L 50 50 1 1 O
|
|
|
|
X EN/DIAB 10 700 600 200 L 50 50 1 1 O
|
|
|
|
X GNDB 20 -100 -1100 200 U 50 50 1 1 P
|
|
|
|
X OUTA 30 700 100 200 L 50 50 1 1 P N
|
|
|
|
X INB 11 -700 400 200 R 50 50 1 1 I
|
|
|
|
X OUTB 21 700 -100 200 L 50 50 1 1 O
|
|
|
|
X VCC 31 0 1100 200 D 50 50 1 1 P N
|
|
|
|
X NC 12 -700 -300 200 R 50 50 1 1 N N
|
|
|
|
X NC 22 -700 -700 200 R 50 50 1 1 N N
|
|
|
|
X OUTA 32 700 100 200 L 50 50 1 1 P
|
|
|
|
X VCC 13 0 1100 200 D 50 50 1 1 P N
|
|
|
|
X VCC 23 0 1100 200 D 50 50 1 1 P N
|
|
|
|
X OUTB 33 700 -100 200 L 50 50 1 1 P N
|
|
|
|
X NC 14 -700 -400 200 R 50 50 1 1 N N
|
|
|
|
X NC 24 -700 -600 200 R 50 50 1 1 N N
|
|
|
|
X OUTB 15 700 -100 200 L 50 50 1 1 P N
|
|
|
|
X OUTA 25 700 100 200 L 50 50 1 1 P N
|
|
|
|
X OUTB 16 700 -100 200 L 50 50 1 1 P N
|
|
|
|
X GNDA 26 100 -1100 200 U 50 50 1 1 P N
|
|
|
|
X NC 17 -700 -800 200 R 50 50 1 1 N N
|
|
|
|
X GNDA 27 100 -1100 200 U 50 50 1 1 P N
|
|
|
|
X GNDB 18 -100 -1100 200 U 50 50 1 1 P N
|
|
|
|
X GNDA 28 100 -1100 200 U 50 50 1 1 P
|
|
|
|
X GNDB 19 -100 -1100 200 U 50 50 1 1 P N
|
|
|
|
X NC 29 -700 -500 200 R 50 50 1 1 N N
|
2017-11-21 23:33:13 +01:00
|
|
|
ENDDRAW
|
|
|
|
ENDDEF
|
|
|
|
#
|
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
|
|
|
#End Library
|