2017-02-13 00:27:19 +01:00
EESchema-DOCLIB Version 2.0
#
$CMP A4950E
D Full-Bridge, DMOS PWM, Motor Driver, 40V, 3.5A, -40 to +85C
K full-bridge h-bridge
F http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx
$ENDCMP
#
$CMP A4950K
D Full-Bridge, DMOS PWM, Motor Driver, 40V, 3.5A, -40 to +125C
K full-bridge h-bridge
F http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP A4952_LY
D Full-Bridge, DMOS PWM, Motor Driver, 40V, 2A, MSOP-10
K Full-bridge h-bridge
F www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en
$ENDCMP
#
$CMP A4953_LJ
D Full-Bridge, DMOS PWM, Motor Driver, 40V, 2A, SOIC-8
K Full-bridge h-bridge
F www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en
$ENDCMP
#
2017-02-13 00:27:19 +01:00
$CMP DRV8308
D Brushless DC motor controller, closed loop, hall sensor inputs, current limiting, SPI interface
K bldc mosfet-driver hall-sensor
F http://www.ti.com/lit/ds/symlink/drv8308.pdf
$ENDCMP
#
$CMP DRV8711
D Stepper motor controller, external N-channel MOSFET, single bipolar stepper motor, dual brushed DC motors
K Stepper driver
F http://www.ti.com/lit/ds/slvsc40f/slvsc40f.pdf
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP DRV8833PW
D Dual H-Bridge Motor Driver, TSSOP-16
K H-bridge motor driver
F http://www.ti.com/lit/ds/symlink/drv8833.pdf
$ENDCMP
#
$CMP DRV8833PWP
D Dual H-Bridge Motor Driver, HTSSOP-16
K H-bridge motor driver
F http://www.ti.com/lit/ds/symlink/drv8833.pdf
$ENDCMP
#
$CMP DRV8833RTY
D Dual H-Bridge Motor Driver, WQFN-16
K H-bridge motor driver
F http://www.ti.com/lit/ds/symlink/drv8833.pdf
$ENDCMP
#
2017-02-13 00:27:19 +01:00
$CMP L293
D Quadruple Half-H Drivers
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
K Half-H Driver Motor
2017-02-13 00:27:19 +01:00
F http://www.ti.com/lit/ds/symlink/l293.pdf
$ENDCMP
#
$CMP L293D
D Quadruple Half-H Drivers
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
K Half-H Driver Motor
2017-02-13 00:27:19 +01:00
F http://www.ti.com/lit/ds/symlink/l293.pdf
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP L297
D Stepper Motor Controller, DIP-20/SO-20
K Stepper Motor Controller
F www.st.com/resource/en/datasheet/cd00000063.pdf
$ENDCMP
#
2017-02-13 00:27:19 +01:00
$CMP L298(H)N
D Dual full bridge motor driver, up to 46V, 4A, Multiwatt-15
K H-bridge motor driver
F http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00000240.pdf
$ENDCMP
#
$CMP L298P
D Dual full bridge motor driver, up to 46V, 4A
K H-bridge motor driver
F http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00000240.pdf
$ENDCMP
#
$CMP PG001M
D Parallel to serial data converter for SLA7042M/SLA7044M
K Support IC for SLA7042M/SLA7044M
F http://www.allegromicro.com/~/media/Files/Sanken/Datasheets/PG001M-Datasheet.ashx
$ENDCMP
#
$CMP SLA7042M
D Unipolar PWM high-current motor driver
K Stepper driver
F www.sumzi.com/upload/files/2007/07/2007073114282034189.PDF
$ENDCMP
#
$CMP SLA7044M
D Unipolar PWM high-current motor driver
K Stepper driver
F http://www.sumzi.com/upload/files/2007/07/2007073114282034189.PDF
$ENDCMP
#
$CMP SLA7070MPRT
D Unipolar 2-phase stepper motor driver, Full and Half step, 1A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7070mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7071MPRT
D Unipolar 2-phase stepper motor driver, Full and Half step, 1.5A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7071mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7072MPRT
D Unipolar 2-phase stepper motor driver, Full and Half step, 2A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7072mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7073MPRT
D Unipolar 2-phase stepper motor driver, Full and Half step, 3A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7073mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7075MPRT
D Unipolar 2-phase stepper motor driver, Microstep, 1A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7075mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7076MPRT
D Unipolar 2-phase stepper motor driver, Microstep, 1.5A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7076mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7077MPRT
D Unipolar 2-phase stepper motor driver, Microstep, 2A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7077mprt_ds_en.pdf
$ENDCMP
#
$CMP SLA7078MPRT
D Unipolar 2-phase stepper motor driver, Microstep, 3A
K Stepper driver
F http://www.semicon.sanken-ele.co.jp/sk_content/sla7078mprt_ds_en.pdf
$ENDCMP
#
$CMP STK672-040-E
D Stepper motor driver with microstepping controller, 1.5A
K Stepper driver
F http://www.onsemi.com/pub_link/Collateral/EN5227-D.PDF
$ENDCMP
#
$CMP STK672-080-E
D Stepper motor driver with microstepping controller, 2.8A
K Stepper driver
F http://www.onsemi.com/pub_link/Collateral/EN6507-D.PDF
$ENDCMP
#
$CMP STSPIN220
D Low voltage stepper motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
K motor driver stepper
F www.st.com/resource/en/datasheet/stspin220.pdf
$ENDCMP
#
$CMP STSPIN230
D Low voltage triple half-bridge motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
K motor driver half-bridge
F www.st.com/resource/en/datasheet/stspin230.pdf
$ENDCMP
#
$CMP STSPIN240
D Low voltage dual brush DC motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
K motor driver dc brushed
F www.st.com/resource/en/datasheet/stspin240.pdf
$ENDCMP
#
Merging from Master (#7)
* reworked MAX77x (datasheet, symbol, missing variants, description ..)
* reworked MC33063-family (symbol, missing variants, footprints, description, ...)
* reworked MC34063 family as alias to MC33063 family
* reworked MCP16301 (symbol, pin-type, description)
* reworked MCP16311/2 (symbol, description, name without -, ...)
* reworked MCP16331 (symbol, pin-type, naming without -...)
* reworked MCP1640 family (symbol, naming wiothout -, ...)
* corrected some descriptions
* reworked MCP165x family (symbol, description)
* reworked MIC2177 (datasheet, symbol, pin-stacks, description...)
* added fixed-output variants of MIC2177
* added MIC2178 family
* reworked MIC4690 (stacked-pins, symbol, description...)
* reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description)
added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25)
* reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...)
* reworked NXE2-series (NC-pin location, description, ...)
* reworked PAM2305 series (missing variants, symbols, description...)
* removed very obsolete PT6100 (no footprint, no description available anymore ...)
* reworked R-78E-series (description)
* Added 3D models for ZETA-433-SO
* Added Foot print name
* Added Foot print name
* reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26)
* Updated description of 868 and 915 MHz
* Made fields invisible
* reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...)
* Add Johansen chip antenna
* Add symbol for MAX6971 LED driver.
http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf
* Move Parallax Propeller to its own library.
* The DIP version of the Propeller has two VDD pins and two VSS pins.
* reworked ST1S10 family (footprints, description, symbols...)
* reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...)
* reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...)
* reworked TL497 family (symbol, pin-types, description, FPFilters, ...)
* reworked TMR_1 series (description...)
* reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...)
* reworked TPS54340/TPS54360 (footprint, pin-types, description...)
* reworked TPS560200 (description, ...)
* reworked TPS56x200 (description, ...)
* reworked TPS6050xDGS (pin-types, description, FPFilter, ...)
* reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19)
* reworked TPS621xy families (dscription, missing variants)
* Removed Antenna.lib, added Antenna_Chip to device.lib
* reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...)
* added scripted Wuerth Mapi inductor models
* reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...)
* added description to TPS62175DQC
* reworked TPS6220xDBV (symbol, description, ...)
* reworked TSR-1 series (description, symbol, ...)
* fixed some KLC issues
* reworked ADG729
* added ADG728
* removed CPC1017N which is already in opto.lib
* Changed Antenna_Chip to use a resonator symbol
* reworked DG308/DG309/DG441/DG442
* Fix naming for Schurter FUP 3d models.
* Reduce pin length, text offset and body width of MCP45HVx1.
* FRSolutions: Add the Particle P1 WiFi module
* rfcom: Update footprint of ESP-12E
* rfcom: Update footprint of ESP-12E
* moved symbols from texas.lib and siliconi.lib to analog_switches.lib
* Copy connector shape from USB_OTG to USB_B_Micro.
I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I
hadn't noticed that there was already a similar USB_OTG symbol.
However, the two need to remain separate, because USB_OTG has VBUS and
GND marked as power inputs, while USB_B_Micro has them as power
outputs.
This commit makes USB_B_Micro identical to USB_OTG, except for the
direction of the power pins. Specifically, it copies the connector
shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the
connector shape when I created USB_B_Micro.)
* added missing NC-pins
fixed naming
added DG411/DG412/DG413 family
* Added FAN3268 to ON Semiconductor library.
* added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319
* corrected label location
* Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12
* added DG417L/DG418L/DG419L
fixed several minor issues (typos, wrong symbols, ...)
* Combined bosch.lib and Bosch.lib
* Don't update library version
* RFSolutions: Rename P1 to Particle_P1
* LED: Add CLV1L-FKB
* LED: CLV1L-FKB remove trademark symbol from description
* fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin!
* added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51)
* reworked DG884
* Added name of package to description (FAN3268)
* reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21)
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26)
* rework HI524 (symbol, description, datasheet, footprint)
* moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...)
* moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS
* added MAX312/313/314 family as ALIASes
* added MAX323/324/325 series
* fixed KLC issues (font-size, wrong FPFilters)
* #IM fixed power-pin stack
* update LTC2309
stack GND and VDD pins allowing for same schematic on both chips.
Minor changes to adhere to KLC.
* Added 3D models for dip switches
* Updated according to PR feedback
* Add TDA1308
Schematic library for the class-AB stereo headphone driver by NXP
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Rename Cortex Debug Connector, add FP filter
- Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10`
- Added FP filter `Conn*:*_2x*` for KiCad v5
* Oscillators: Add SG3030CM
* Removed CVS type
* Removed CVS type
* Updated leg and pad size
* pspice: Add MOSFET symbols
* Add cross 4p net tie
* Add cross 4p net tie
* Add symbol LED_BGRA.
This is the pinout used by "Piranha" RGB LEDs. See that pull request
for more information.
* Add "LED*" footprint filter to LED symbols in "device" library.
Also:
* Added "~" datasheet to LED symbols to suppress KLC errors.
* Corrected cases where fields 2 and 3 were not invisible.
Did not attempt to correct other pre-existing KLC errors. (Pin placement.)
* move symbol and package name, add potentiometer symbol inside.
* Move footprint name more to the right.
* Oscillators: Fix pin offset in SG-3030CM
* Separate power pins on generic opamps
* Update generic opamps symbols
* Add x cap discharge ICs
* Add x cap discharge ICs
* Oscillators: Rename SG3030CM footprint to comply with KLC
* Add TI OPA356 and OPA2356 operational amplifiers
They use the same pinout as existing devices, so they are just new
aliases.
* Update atmel.lib
* Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680
* Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side
* MCU_Texas_MSP430: fix G2553
* Update fp-lib-table.for-github
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-pretty
* Update fp-lib-table.for-github
* Add TI OPA1622 operational amplifier
* - removed unneeded D-SUB 3D models
- moved bornierXX 3D models
* renamed bornier 3D models
* - moved Phoenix 3D models to correct location
* fixed D-SUB FPFilters for new footprints
* revert DSUB-fixes (will do separately)
* Added the Analog Devices ADP2302ARDZ
* visual enhancements as requested
* Added the Microchip MCP1825S 500mA LDO Regulator
* Update net ties
* Update net ties
* Fixed keywords, modified pin name offset, fixed pin type (FAN3268).
* Clearing an error in STM32L071/STM32L072 loading libs
* Add PD70224
* Add PD70224
* Fixed dot location
* Add "T" 3-pin net tie
* Add "T" 3-pin net tie
* Remove duplicated polylines in net ties
* Removed the errored lines altogether.
* Add OPA890 operational amplifier in SOT23-6 package
* Add Allegro current sensors
* Updated sym_lib_table file
* Added TJA1052i
* Added Alias
Alias for different isolation voltages
* Set pointing
* Added isolation lines
* Replaced illegal character
* fix sym-lib-table typos ang missing Logic_ prefixes
* added LSM303C and LSM6DS3
* Fix footprint filter
* hopefully final fixups
* MCU_Texas_MSP430: update keywords
* MCU_Texas_MSP430: update description
- do not duplicate part name (KLC 3.0.2 S6.3)
- append simplified footprint name (KLC 3.0.2 S6.3)
* MCU_Texas_MSP430: update documentation file
Always use a symlink based on the actual part number, even if multiple
devices share the same data sheet.
* Added better descriptions for symbol libraries
* Add TPS2592xx
Schematic library for the 5V/12V eFuse protection switch by TI
Signed-off-by: Adam Heinrich <adam@adamh.cz>
* Moved nc pins and made them visible
* Fixed Stacking & Naming
* Add TPS22929D power distribution switch
* - adjusted names of the symbols to the new KLC
* Added TPS61090, TPS61091, and TPS61092 boost converters.
* added TPD3E001DRLR TPD2E2U06
* updated to resolve jenkins issues
* Updated to address automated script issues
* Fixed additional errors
* Fixed ground pin alignment
* Updated footprint
* Microchip: SY89312V
3.3/5V, ECL/PECL 4GHz x2 clock divider
Documentation:
http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf
* fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838)
* removed whiteline that lead to error
* changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0
* Add Analog Devices ADP5070/5071 switching regulators
* Adjusted the PIC12 symbol names to the new KLC
* Changed pin order
* fixed several issues in transistors.lib/dcm:
- unified naming/description
- fixed some packages (e.g. TO-220-variants had wrong names)
- fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714)
- added BF545
- added some missing datasheets
* Removed unnecessary changes to rest of the file
* - removed non-existent device from DCM (that device really is not produced!)
- fixed one description (package type)
* Update .travis.yml
Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP TB6612FNG
D Driver IC for Dual DC motor, SSOP-24
K H-bridge motor driver
F https://toshiba.semicon-storage.com/us/product/linear/motordriver/detail.TB6612FNG.html
$ENDCMP
#
2017-02-13 00:27:19 +01:00
$CMP TMC262
D Driver for two-phase stepper motors with external mosfet
K trinamic tlc262 stepper
F http://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC262_datasheet.pdf
$ENDCMP
#
2017-11-21 23:33:13 +01:00
$CMP VNH2SP30
D Full Bridge Motor Driver, 41V, 30A, -40 to 150C
K full-bridge h-bridge
F http://www.st.com/content/ccc/resource/technical/document/datasheet/group2/66/b8/f5/2c/9a/66/41/c7/CD00043711/files/CD00043711.pdf/jcr:content/translations/en.CD00043711.pdf
$ENDCMP
#
2017-02-13 00:27:19 +01:00
#End Doc Library
