tztz/KicadLib
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
KicadLib/library/linear.dcm

1936 lines
53 KiB
Plaintext
Raw Normal View History

Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
EESchema-DOCLIB Version 2.0
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD620
D Low Cost, Low Power, Instrumentation Amplifier, DIP-8/SOIC-8
K Instrumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD620.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD623
D Single Rail-to-Rail, Low Cost Instrumentation Amplifier, DIP-8/SOIC-8/MSOP-8
K single instumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD623.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD797
D Ultralow Distortion, Ultralow Noise Op Amp, DIP-8/SOIC-8
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD797.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP AD813
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Supply, Low Power, Triple Video Amplifier, DIP-14/SOIC-14
K triple opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD813.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP AD8202
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 28V High Common-Mode Voltage, Single-Supply Difference Amplifier, 10V/V x 2V/V adjustable gain, bandwidth 50kHz, Vcc=3.5V~12V, unidirectional, SOIC-8/MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor preamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8202.pdf
$ENDCMP
#
$CMP AD8203
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 30V High Common-Mode Voltage, Single-Supply Difference Amplifier, 7V/V x 2V/V adjustable gain, bandwidth 60kHz, Vcc=3.5V~12V, unidirectional, SOIC-8/MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor preamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8203.pdf
$ENDCMP
#
$CMP AD8205
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V Single-Supply, System Difference Amplifier, 50V/V gain, bandwidth 50kHz, Vcc=5V, SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS difference amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8205.pdf
$ENDCMP
#
$CMP AD8206
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Common-Mode Voltage, Bidirectional, Current Shunt Amplifier, 20V/V gain, bandwidth 100kHz, Vcc=5V, SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8206.pdf
$ENDCMP
#
$CMP AD8207
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V (35V) Zero-Drift, High Voltage, Bidirectional, Difference Amplifier, 20V/V gain, bandwidth 150kHz, Vcc=5V (3.3V), SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense difference amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8207.pdf
$ENDCMP
#
$CMP AD8208
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 45V High Voltage, Precision Difference Amplifier, 10V/V x 2V/V adjustable gain, bandwidth 70kHz, Vcc=5V, unidirectional, SOIC-8/MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor preamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8208.pdf
$ENDCMP
#
$CMP AD8209
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 45V High Voltage, Precision Difference Amplifier, 7V/V x 2V/V adjustable gain, bandwidth 80kHz, Vcc=5V, unidirectional, MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor preamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8209.pdf
$ENDCMP
#
$CMP AD8210
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Voltage, Bidirectional Current Shunt Monitor, 20V/V gain, bandwidth 450kHz, Vcc=5V, SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8210.pdf
$ENDCMP
#
$CMP AD8211
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Voltage, Current Shunt Monitor, 20V/V gain, bandwidth 500kHz, Vcc=5V, SOT-23-5
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8211.pdf
$ENDCMP
#
$CMP AD8212
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Voltage Current, Shunt Monitor, adjustable gain, bandwidth 1000kHz, Vcc=7V~65V, current output, unidirectional, MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense shunt monitor amplifier linear
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8212.pdf
$ENDCMP
#
$CMP AD8213
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V Dual, High Voltage, Current Shunt Monitor, 20V/V gain, bandwidth 500kHz, Vcc=5V, MSOP-10
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered dual monitor
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8213.pdf
$ENDCMP
#
$CMP AD8215
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Voltage, Current Shunt Monitor, 20V/V gain, bandwidth 450kHz, Vcc=5V, unidirectional, SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8215.pdf
$ENDCMP
#
$CMP AD8216
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 65V High Bandwidth, Bidirectional Difference Amplifier, 3V/V gain, bandwidth 3MHz, Vcc=5V, SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K HS difference amplifier linear
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8216.pdf
$ENDCMP
#
$CMP AD8217
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 80V High Resolution, Zero-Drift, Current Shunt Monitor, 20V/V gain, bandwidth 500kHz, internal LDO, unidirectional, MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8217.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD8218xCP
D 80V Zero Drift, Bidirectional, Current Shunt Monitor, 20V/V gain, bandwidth 450kHz, Vcc=5V, LFCSP-8
K highside HS current sense amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8218.pdf
$ENDCMP
#
$CMP AD8218xRM
D 80V Zero Drift, Bidirectional, Current Shunt Monitor, 20V/V gain, bandwidth 450kHz, Vcc=5V, MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8218.pdf
$ENDCMP
#
$CMP AD8219
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 80V Zero Drift, Unidirectional, Current Shunt Monitor, 60V/V gain, bandwidth 500kHz, Vcc=4V~80V, MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear buffered monitor
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8219.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD8230
D 16 V Rail-to-Rail, Zero-Drift, Precision Instrumentation Amplifier, SOIC-8
K single instrumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8230.pdf
$ENDCMP
#
$CMP AD8236
D Single 40 μA Micropower Instrumentation Amplifier with Zero Crossover Distortion, MSOP-8
K single instumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8236.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP AD8417
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 70V Bidirectional, Zero Drift, Current Sense Amplifier, 60V/V gain, bandwidth 250kHz, VS=2.7V~5.5V, SOIC-8/MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8417.pdf
$ENDCMP
#
$CMP AD8418
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 70V Bidirectional, Zero Drift, Current Sense Amplifier, 20V/V gain, bandwidth 250kHz, VS=2.7V~5.5V, SOIC-8/MSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K highside HS current sense amplifier linear
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8418.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP AD8421
D Single Low Power Instrumentation Amplifier, SOIC-8/MSOP-8
K single instumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8421.pdf
$ENDCMP
#
$CMP AD8422
D Single High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier, SOIC-8/MSOP-8
K single instumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8422.pdf
$ENDCMP
#
$CMP AD8429
D Single Low Noise Instrumentation Amplifier, SOIC-8
K single instumentation amplifier
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8429.pdf
$ENDCMP
#
$CMP AD8610
D Single Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers, SOIC-8
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8610_8620.pdf
$ENDCMP
#
$CMP AD8620
D Dual Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers, SOIC-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/AD8610_8620.pdf
$ENDCMP
#
$CMP ADA4075-2
D Ultralow Noise Amplifier at Lower Power, SOIC-8/LFCSP-8
K dual low-power opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.analog.com/static/imported-files/data_sheets/ADA4075-2.pdf
$ENDCMP
#
ADA4807-1 : Fixed location, description and package
2017-05-18 11:48:49 +02:00
$CMP ADA4807-1
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Rail-to-Rail Input/Output Amplifiers, with disable, SC-70-6/SOT-23-6
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4807-1_4807-2_4807-4.pdf
$ENDCMP
#
$CMP ADA4807-2ACP
D Dual Rail-to-Rail Input/Output Amplifiers, with disable, SC-70-6/SOT-23-6
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4807-1_4807-2_4807-4.pdf
$ENDCMP
#
$CMP ADA4807-2ARM
D Dual Rail-to-Rail Input/Output Amplifiers, MSOP-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4807-1_4807-2_4807-4.pdf
$ENDCMP
#
$CMP ADA4807-4
D Quad Rail-to-Rail Input/Output Amplifiers, TSSOP-14
K quad opamp
ADA4807-1 : Fixed location, description and package
2017-05-18 11:48:49 +02:00
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADA4807-1_4807-2_4807-4.pdf
bugfix
2017-05-18 12:56:54 +02:00
$ENDCMP
ADA4807-1 : Fixed location, description and package
2017-05-18 11:48:49 +02:00
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP ADCMP350
D Single-input comparator, internal 0.6V reference, Active-Low Open-Drain output, SC-70-4 package
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
K single comparator with reference
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADCMP350_354_356.pdf
$ENDCMP
#
$CMP ADCMP354
D Single-input comparator, internal 0.6V reference, Active-High Open-Drain output, SC-70-4 package
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
K single comparator with reference
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADCMP350_354_356.pdf
$ENDCMP
#
$CMP ADCMP356
D Single-input comparator, internal 0.6V reference, Active-High Push-Pull output, SC-70-4 package
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
K single comparator with reference
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.analog.com/media/en/technical-documentation/data-sheets/ADCMP350_354_356.pdf
$ENDCMP
#
$CMP CA3080
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 2MHz, Operational Transconductance Amplifier (OTA), gM spread 2:1, DIP-8/SOIC-8
K operational transconductance amplifier ota
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/Intersil/documents/ca30/ca3080-a.pdf
$ENDCMP
#
$CMP CA3080A
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 2MHz, Operational Transconductance Amplifier (OTA), gM spread 1.6:1, DIP-8/SOIC-8
K operational transconductance amplifier ota
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/Intersil/documents/ca30/ca3080-a.pdf
$ENDCMP
#
$CMP CA3130
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 15MHz, BiMOS Operational Amplifier with MOSFET Input/CMOS Output, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/intersil/documents/ca31/ca3130-a.pdf
$ENDCMP
#
$CMP CA3140
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/intersil/documents/ca31/ca3140-a.pdf
$ENDCMP
#
$CMP ICM7555
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D CMOS General Purpose Timer, DIP-8/SOIC-8
K single timer 555
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/Intersil/documents/icm7/icm7555-56.pdf
$ENDCMP
#
$CMP ICM7556
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual CMOS General Purpose Timer, DIP-14/SOIC-14
K dual timer 556
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.intersil.com/content/dam/Intersil/documents/icm7/icm7555-56.pdf
$ENDCMP
#
$CMP INA128
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision, Low Power Instrumentation Amplifier G = 1 + 50kOhm/Rg, DIP-8/SOIC-8
K instrumentation opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ina128.pdf
$ENDCMP
#
$CMP INA129
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision, Low Power Instrumentation Amplifier G = 1 + 49.4kOhm/Rg, DIP-8/SOIC-8
K instrumentation opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ina128.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP INA138
D High-Side Measurement Current Shunt Monitor, 36V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina138.pdf
$ENDCMP
#
$CMP INA168
D High-Side Measurement Current Shunt Monitor, 60V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina138.pdf
$ENDCMP
#
$CMP INA193
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 20V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA194
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 50V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA195
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 100V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA196
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 20V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA197
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 50V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA198
D Current Shunt Monitor −16 V to +80 V Common-Mode Range, 100V/V, SOT-23-5
K current sense shunt monitor
F http://www.ti.com/lit/ds/symlink/ina193.pdf
$ENDCMP
#
$CMP INA282
D High-Accuracy, Wide Common-Mode Range, Bidirectional Current Shunt Monitors, Zero-Drift Series, 50V/V, SOIC-8/VSSOP-8
K current monitor shunt sensor bidirectional
F http://www.ti.com/lit/ds/symlink/ina282.pdf
$ENDCMP
#
$CMP INA283
D High-Accuracy, Wide Common-Mode Range, Bidirectional Current Shunt Monitors, Zero-Drift Series, 200V/V, SOIC-8/VSSOP-8
K current monitor shunt sensor bidirectional
F http://www.ti.com/lit/ds/symlink/ina282.pdf
$ENDCMP
#
$CMP INA284
D High-Accuracy, Wide Common-Mode Range, Bidirectional Current Shunt Monitors, Zero-Drift Series, 500V/V, SOIC-8/VSSOP-8
K current monitor shunt sensor bidirectional
F http://www.ti.com/lit/ds/symlink/ina282.pdf
$ENDCMP
#
$CMP INA285
D High-Accuracy, Wide Common-Mode Range, Bidirectional Current Shunt Monitors, Zero-Drift Series, 1000V/V, SOIC-8/VSSOP-8
K current monitor shunt sensor bidirectional
F http://www.ti.com/lit/ds/symlink/ina282.pdf
$ENDCMP
#
$CMP INA286
D High-Accuracy, Wide Common-Mode Range, Bidirectional Current Shunt Monitors, Zero-Drift Series, 100V/V, SOIC-8/VSSOP-8
K current monitor shunt sensor bidirectional
F http://www.ti.com/lit/ds/symlink/ina282.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP INA326
D Precision, Rail-to-Rail I/O Instrumentation Amplifier, MSOP-8 package
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
K instrumentation opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ina326.pdf
$ENDCMP
#
$CMP INA327
D Precision, Rail-to-Rail I/O Instrumentation Amplifier, MSOP-10 package
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
K instrumentation opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ina326.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP L272
D Dual Power Operation Amplifier, DIP-16
K dual power opamp
F www.st.com/resource/en/datasheet/l272.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP L272D
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Power Operation Amplifier, SOIC-16
K dual power opamp
F www.st.com/resource/en/datasheet/l272.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP L272M
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Power Operation Amplifier, DIP-8
K dual power opamp
F www.st.com/resource/en/datasheet/l272.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LF155
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF156
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF256
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF257
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF355
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF356
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
$CMP LF357
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET Input Operational Amplifiers, DIP-8/SOIC-8
K single jfet opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lf357.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LF398H
D Sample And Hold Unity Gain Follower, TO-99-8
K sample hold buffer unity gain
F http://www.ti.com/lit/ds/symlink/lf398-n.pdf
$ENDCMP
#
$CMP LF398_DIP8
D Sample And Hold Unity Gain Follower, DIP-8
K sample hold buffer unity gain
F http://www.ti.com/lit/ds/symlink/lf398-n.pdf
$ENDCMP
#
$CMP LF398_SOIC14
D Sample And Hold Unity Gain Follower, SOIC-14
K sample hold buffer unity gain
F http://www.ti.com/lit/ds/symlink/lf398-n.pdf
$ENDCMP
#
$CMP LF398_SOIC8
D Sample And Hold Unity Gain Follower, SOIC-8
K sample hold buffer unity gain
F http://cds.linear.com/docs/en/datasheet/lt0398s8.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LH0002H
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Wide-Band, High Current, Unity Gain Buffer Amplifier, TO-5-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K Buffer
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
F http://www.calogic.net/pdf/LH0002_Datasheet_Rev_A.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM101
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Operational Amplifier, DIP-8/TO-99-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm101a-n.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM13600
D Dual Operational Transconductance Amplifiers with Linearizing Diodes and Buffers, DIP-16/SOIC-16
K operational transconductance amplifier OTA
F http://pdf.datasheetcatalog.com/datasheet/nationalsemiconductor/DS007980.PDF
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM13700
D Dual Operational Transconductance Amplifiers with Linearizing Diodes and Buffers, DIP-16/SOIC-16
K operational transconductance amplifier OTA
F http://www.ti.com/lit/ds/symlink/lm13700.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM201
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Operational Amplifier, DIP-8/TO-99-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm101a-n.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM2901
D Quad Differential Comparators, DIP-14/SOIC-14/SSOP-14
K quad comparator
F http://www.ti.com/lit/ds/symlink/lm339.pdf
$ENDCMP
#
$CMP LM2902
D Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/lm2902-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM2903
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/SSOP-8
K dual comparator
F http://www.ti.com/lit/ds/symlink/lm393-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM2904
D Dual Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lm358.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM301
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Operational Amplifier, DIP-8/TO-99-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm101a-n.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM311
D Voltage Comparator, DIP-8/SOIC-8/SSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K comp
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
F http://www.ti.com/lit/ds/symlink/lm311.pdf
$ENDCMP
#
$CMP LM318H
D Operational Amplifier, TO-99-8
K single opamp
F http://www.ti.com/lit/ds/symlink/lm318-n.pdf
$ENDCMP
#
$CMP LM318J
D Operational Amplifier, DIP-14
K single opamp
F http://www.ti.com/lit/ds/symlink/lm318-n.pdf
$ENDCMP
#
$CMP LM318M
D Operational Amplifier, SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/lm318-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM318N
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Operational Amplifier, DIP-8
K single opamp
F http://www.ti.com/lit/ds/symlink/lm318-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM319
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D High Speed Dual Comparator, DIP-14/SOIC-14
K dual comparator
F http://www.ti.com/lit/ds/symlink/lm319-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM319H
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D High Speed Dual Comparator, TO-100-10
K dual comparator
F http://www.ti.com/lit/ds/symlink/lm319-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM321
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low Power Single Operational Amplifier, SOT-23-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm321.pdf
$ENDCMP
#
$CMP LM324
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/lm2902-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM324A
D Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/lm2902-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM339
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad Differential Comparators, DIP-14/SOIC-14/SSOP-14
K quad comparator
F http://www.ti.com/lit/ds/symlink/lm339.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM358
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low-Power, Dual Operational Amplifiers, DIP-8/SOIC-8/TO-99-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lm2904-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM358_DFN
D Low-Power, Dual Operational Amplifiers, DFN-8
K dual opamp
F www.st.com/resource/en/datasheet/lm358.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM386
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low Voltage Audio Power Amplifier, DIP-8/SOIC-8/SSOP-8
K single Power opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm386.pdf
$ENDCMP
#
$CMP LM393
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low-Power, Low-Offset Voltage, Dual Comparators, DIP-8/SOIC-8/SSOP-8
K dual comparator
F http://www.ti.com/lit/ds/symlink/lm393-n.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM4250
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Programmable Operational Amplifier, DIP-8/SOIC-8
K Programmable opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm4250.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM4562
D Dual High-Performance, High-Fidelity Audio Operational Amplifier, DIP-8/SOIC-8/TO-99-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lm4562.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM555
D Timer, DIP-8/SOIC-8/SSOP-8
K single timer
F http://www.ti.com/lit/ds/symlink/lm555.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LM556
D Dual Timer, DIP-14/SOIC-14
K dual timer
F http://www.ti.com/lit/ds/symlink/lm556.pdf
$ENDCMP
#
$CMP LM6171D
D High Speed Low Power Low Distortion Voltage Feedback Amplifier, SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/lm6171.pdf
$ENDCMP
#
$CMP LM6171xxN
D Single High Speed Low Power Low Distortion Voltage Feedback Amplifier, DIP-8
K single opamp
F http://www.ti.com/lit/ds/symlink/lm6171.pdf
$ENDCMP
#
$CMP LM6172
D Dual High Speed, Low Power, Low Distortion, Voltage Feedback Amplifiers, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lm6172.pdf
$ENDCMP
#
$CMP LM6321H
D High Speed Buffer, TO-5-8
K single buffer
F http://www.electronica60norte.com/mwfls/pdf/LM6221.pdf
$ENDCMP
#
$CMP LM6321M
D High Speed Buffer, SOIC-14
K single buffer
F http://www.electronica60norte.com/mwfls/pdf/LM6221.pdf
$ENDCMP
#
$CMP LM6321N
D High Speed Buffer, DIP-8
K single buffer
F http://www.electronica60norte.com/mwfls/pdf/LM6221.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM6361
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single High Speed Operational Amplifier, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm6161.pdf
$ENDCMP
#
$CMP LM7332
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Rail-to-Rail Input and Output 30-V, Wide Voltage Range, High Output, Operational Amplifier, SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lm7332.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LM733CH
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Differential Amplifier, TO-5-10
K single differential video opamp
F http://www.soemtron.org/downloads/disposals/lm733cn.pdf
$ENDCMP
#
$CMP LM733CN
D Single Differential Amplifier, DIP-14
K single differential video opamp
F http://www.soemtron.org/downloads/disposals/lm733cn.pdf
$ENDCMP
#
$CMP LM733H
D Single Differential Amplifier, TO-5-10
K single differential video opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.soemtron.org/downloads/disposals/lm733cn.pdf
$ENDCMP
#
$CMP LM741
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Operational Amplifier, DIP-8/TO-99-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lm741.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LMC555xM
D CMOS Timer, SOIC-8
K single timer
F http://www.ti.com/lit/ds/symlink/lmc555.pdf
$ENDCMP
#
$CMP LMC555xMM
D CMOS Timer, VSSOP-8
K single timer
F http://www.ti.com/lit/ds/symlink/lmc555.pdf
$ENDCMP
#
$CMP LMC555xN
D CMOS Timer, DIP-8
K single timer
F http://www.ti.com/lit/ds/symlink/lmc555.pdf
$ENDCMP
#
$CMP LMC555xTP
D CMOS Timer, DSBGA-8
K single timer
F http://www.ti.com/lit/ds/symlink/lmc555.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LMC6062
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision CMOS Dual Micropower Operational Amplifier, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lmc6062.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP LMC6082
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision CMOS Dual Operational Amplifier, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lmc6082.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Add LMC6482
2017-04-02 18:28:17 +02:00
$CMP LMC6482
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual CMOS Rail-to-Rail Input and Output Operational Amplifier, DIP-8/SOIC-8, SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/lmc6482.pdf
Add LMC6482
2017-04-02 18:28:17 +02:00
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP LMC6484
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad CMOS Rail-to-Rail Input and Output Operational Amplifier, DIP-14/SOIC-14
K quad opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lmc6484.pdf
$ENDCMP
#
$CMP LMV321
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Low-Voltage Rail-to-Rail Output Operational Amplifiers, SOT-23-5/SC-70-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lmv324.pdf
$ENDCMP
#
$CMP LMV324
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad Low-Voltage Rail-to-Rail Output Operational Amplifier, SOIC-14/SSOP-14
K quad opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lmv324.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LMV331
D Single General-Purpose Low-Voltage Comparator, SOT-23-5/SC-70-5
K single comparator
F http://www.ti.com/lit/ds/symlink/lmv331.pdf
$ENDCMP
#
$CMP LMV339
D Quad General-Purpose Low-Voltage Comparator, SOIC-14/TSSOP-14
K quad comparator
F http://www.ti.com/lit/ds/symlink/lmv331.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP LMV358
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Low-Voltage Rail-to-Rail Output Operational Amplifiers, SOIC-8/SSOP-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lmv324.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LMV393
D Dual General-Purpose Low-Voltage Comparator, SOIC-8/TSSOP-8/VSSOP-8
K dual comparator
F http://www.ti.com/lit/ds/symlink/lmv331.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP LMV601
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 1MHz, Low-Power, General-Purpose, 2.7V Operational Amplifiers, SC-70-6
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/lmv601.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LT1011
D Voltage Comparator, DIP-8/SOIC-8/TO-5-8
K comp
F http://cds.linear.com/docs/en/datasheet/1011afe.pdf
$ENDCMP
#
$CMP LT1012
D Single Picoamp Input Current, Microvolt Offset, Low Noise Op Amp, DIP-8/SOIC-8/TO-5-8
K single opamp
F http://cds.linear.com/docs/en/datasheet/1012afbs.pdf
$ENDCMP
#
$CMP LT1016
D Single UltraFast Precision 10ns Comparator, DIP-8/SOIC-8
K single comparator
F http://cds.linear.com/docs/en/datasheet/1016fc.pdf
$ENDCMP
#
$CMP LT1116
D Single 12ns, Single Supply Ground-Sensing Comparator, DIP-8/SOIC-8
K single comparator
F http://cds.linear.com/docs/en/datasheet/1116fc.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP LT1363
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 70MHz, 1000V/µs Operational Amplifier, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/1363fa.pdf
$ENDCMP
#
$CMP LT1492
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 5MHz, 3V/µs, Low Power, Single Supply, Dual Precision Op Amps, DIP-8/SOIC-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/14923f.pdf
$ENDCMP
#
$CMP LT1493
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 5MHz, 3V/µs, Low Power, Single Supply, Quad Precision Op Amps, SOIC-16
K quad opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/14923f.pdf
$ENDCMP
#
$CMP LT5560
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 0.01MHz to 4GHz Low Power Active Mixer, DFN-8
K rf mixer
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/5560f.pdf
$ENDCMP
#
$CMP LT6106
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 36V Low Cost, High Side Current Sense, SOT-23-5
K current sense
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6106fb.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LT6233
D Dual 60MHz, Rail-to-Rail Output, 1.9nV/√Hz, 1.2mA, Operational Amplifier, SOIC-8
K dual opamp
F http://cds.linear.com/docs/en/datasheet/623345fc.pdf
$ENDCMP
#
$CMP LTC1100xN8
D Single Precision, Zero-Drift Instrumentation Amplifier, Gain = 100, DIP-8
K single instrumentation amp
F http://cds.linear.com/docs/en/datasheet/1100fc.pdf
$ENDCMP
#
$CMP LTC1100xSW
D Single Precision, Zero-Drift Instrumentation Amplifier, Gain = 10/100, SOIC-16W
K single instrumentation amp
F http://cds.linear.com/docs/en/datasheet/1100fc.pdf
$ENDCMP
#
$CMP LTC1151CN8
D Dual ±15V, Zero-Drift, Operational Amplifier, DIP-8
K dual opamp
F http://www.linear.com/docs/3482
$ENDCMP
#
$CMP LTC1151CSW
D Dual ±15V, Zero-Drift, Operational Amplifier, SOIC-16W
K dual opamp
F http://www.linear.com/docs/3482
$ENDCMP
#
$CMP LTC1152
D Rail-to-Rail Input, Rail-to-Rail Output, Zero-Drift Op Amp, DIP-8, SOIC-8
K single opamp
F http://www.linear.com/docs/2857
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP LTC4414
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 36V, Low Loss PowerPath Controller for Large PFETs, MSOP-8
K active diode PFET controller
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/4414fc.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6081xDD
D Precision Dual CMOS Rail-to-Rail Input/Output Amplifiers, DFN-10
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/60812fd.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6081xMS8
D Precision Dual CMOS Rail-to-Rail Input/Output Amplifiers, MSOP-8
K dual opamp
F http://cds.linear.com/docs/en/datasheet/60812fd.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6082xDHC
D Precision Quad CMOS Rail-to-Rail Input/Output Amplifiers, DFN-16
K quad opamp
F http://cds.linear.com/docs/en/datasheet/60812fd.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6082xGN
D Precision Quad CMOS Rail-to-Rail Input/Output Amplifiers, SSOP-16
K quad opamp
F http://cds.linear.com/docs/en/datasheet/60812fd.pdf
$ENDCMP
#
$CMP LTC6102HVxDD
D Precision Zero Drift Current Sense Amplifier, 100V, DFN-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6102HVxMS8
D Precision Zero Drift Current Sense Amplifier, 100V, MSOP-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
$CMP LTC6102xDD
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Zero Drift Current Sense Amplifier, 60V, DFN-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
$CMP LTC6102xDD-1
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Zero Drift Current Sense Amplifier, 60V, DFN-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
$CMP LTC6102xMS8
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Zero Drift Current Sense Amplifier, 60V, MSOP-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
$CMP LTC6102xMS8-1
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Zero Drift Current Sense Amplifier, 60V, MSOP-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6102fe.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6362xDD
D Precision, Low Power, Rail-to-Rail Input/Output, Differential Op Amp/SAR ADC Driver, MSOP-8
K single differential opamp
fix LTC6362 - fix output pin types - split MSOP and DFN version (DFN has pad - +1pin) - fix FP filters - DFN had wrong pitch - assign default FPs
2017-03-28 21:42:37 +02:00
F http://cds.linear.com/docs/en/datasheet/6362fa.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP LTC6362xMS8
D Precision, Low Power, Rail-to-Rail Input/Output, Differential Op Amp/SAR ADC Driver, DFN-8
K single differential opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://cds.linear.com/docs/en/datasheet/6362fa.pdf
$ENDCMP
#
$CMP MAX4080F
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Output, Unidirectional, 5V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4080S
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Output, Undirectional, 60V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4080T
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Output, Unidirectional, 20V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4081F
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Output, Bidirectional, 5V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4081S
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Outpute, Bidirectional, 60V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4081T
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 76V, High-Side, Current-Sense Amplifiers with Voltage Output, Bidirectional, 20V/V Gain, SOIC-8/uMAX-8
K current sense amplifier
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4080-MAX4081.pdf
$ENDCMP
#
$CMP MAX4238ASA
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Ultra-Low Offset/Drift, Low-Noise, Precision Amplifiers, SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4238-MAX4239.pdf
$ENDCMP
#
$CMP MAX4238AUT
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Ultra-Low Offset/Drift, Low-Noise, Precision Amplifiers, SOT-23-6
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4238-MAX4239.pdf
$ENDCMP
#
$CMP MAX4239ASA
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Ultra-Low Offset/Drift, Low-Noise, Precision Amplifiers, SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4238-MAX4239.pdf
$ENDCMP
#
$CMP MAX4239AUT
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Ultra-Low Offset/Drift, Low-Noise, Precision Amplifiers, SOT-23-6
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://datasheets.maximintegrated.com/en/ds/MAX4238-MAX4239.pdf
$ENDCMP
#
$CMP MAX471
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision, High-Side, Current-Sense Amplifiers, DIP-8/SOIC-8
K current sense amplifier
F http://pdfserv.maximintegrated.com/en/ds/MAX471-MAX472.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP MAX472
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision, High-Side, Current-Sense Amplifiers, DIP-8/SOIC-8
K current sense amplifier
F http://pdfserv.maximintegrated.com/en/ds/MAX471-MAX472.pdf
$ENDCMP
#
$CMP MC33078
D Low Noise, Dual Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
F https://www.onsemi.com/pub/Collateral/MC33078-D.PDF
$ENDCMP
#
$CMP MC33079
D Low Noise, Quad Operational Amplifiers, DIP-14/SOIC-14
K quad opamp
F https://www.onsemi.com/pub/Collateral/MC33078-D.PDF
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP MC33178
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Low Power, Low Noise Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
F https://www.onsemi.com/pub/Collateral/MC33178-D.PDF
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MC33179
D Quad Low Power, Low Noise Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F https://www.onsemi.com/pub/Collateral/MC33178-D.PDF
$ENDCMP
#
$CMP MCP6001-OT
D 1MHz, Low-Power Op Amp, SOT-23-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6001R
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 1MHz, Low-Power Op Amp, SOT-23-5
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6001U
D 1MHz, Low-Power Op Amp, SOT-23-5
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6001x-LT
D 1 MHz, Low-Power Op Amp, SC-70-5
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6002-xMC
D 1MHz, Low-Power Op Amp, DFN-8
K dual opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6002-xMS
D 1MHz, Low-Power Op Amp, MSOP-8
K dual opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6002-xP
D 1MHz, Low-Power Op Amp, DIP-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP6002-xSN
D 1MHz, Low-Power Op Amp, SOIC-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
$CMP MCP6004
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D 1MHz, Low-Power Op Amp, DIP-14/SOIC-14/TSSOP-14
K quad opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21733j.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP601-xOT
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, SOT-23-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP601-xP
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, DIP-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP601-xSN
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP601-xST
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, TSSOP-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP601R
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, SOT-23-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
$CMP MCP602
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual 2.7V to 6.0V Single Supply CMOS Op Amps, DIP-8/SOIC-8/TSSOP-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP603-xCH
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, with Chip Select, SOT-23-6
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP603-xP
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, with Chip Select, DIP-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP603-xSN
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, with Chip Select, SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP603-xST
D Single 2.7V to 6.0V Single Supply CMOS Op Amps, with Chip Select, TSSOP-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
$CMP MCP604
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad 2.7V to 6.0V Single Supply CMOS Op Amps, DIP-14/SOIC-14/TSSOP-14
K quad opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/21314g.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP6561-OT
D Single 1.8V Low-Power Push-Pull Output Comparator, SOT-23-5
K single comparator
F http://ww1.microchip.com/downloads/en/DeviceDoc/22139C.pdf
$ENDCMP
#
$CMP MCP6561R
D Single 1.8V Low-Power Push-Pull Output Comparator, SOT-23-5
K dual comparator
F http://ww1.microchip.com/downloads/en/DeviceDoc/22139C.pdf
$ENDCMP
#
$CMP MCP6561U
D Single 1.8V Low-Power Push-Pull Output Comparator, SOT-23-5
K dual comparator
F http://ww1.microchip.com/downloads/en/DeviceDoc/22139C.pdf
$ENDCMP
#
$CMP MCP6561x-LT
D 1.8V Low-Power Push-Pull Output Comparator, SC-70-5
K single comparator
F http://ww1.microchip.com/downloads/en/DeviceDoc/22139C.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP MCP6562
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual 1.8V Low-Power Push-Pull Output Comparator, SOIC-8/MSOP-8
K dual comparator
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/22139C.pdf
$ENDCMP
#
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
$CMP MCP6566
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single 1.8V Low-Power Open-Drain Output Comparator, SOT-23-5/SC-70
K single comparator
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/DS20002143E.pdf
$ENDCMP
#
$CMP MCP6566R
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single 1.8V Low-Power Open-Drain Output Comparator, SOT-23-5
K single comparator
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/DS20002143E.pdf
$ENDCMP
#
$CMP MCP6566U
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single 1.8V Low-Power Open-Drain Output Comparator, SOT-23-5
K single comparator
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/DS20002143E.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP MCP6567
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual 1.8V Low-Power Push-Pull Output Comparator, SOIC-8/MSOP-8
K dual comparator
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.farnell.com/datasheets/2133492.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP6569
D Quad 1.8V Low-Power Open-Drain Output Comparator, SOIC-14/TSSOP-14
K quad comparator
F http://ww1.microchip.com/downloads/en/DeviceDoc/DS20002143E.pdf
$ENDCMP
#
$CMP MCP6L91RT-EMS
D 10 MHz, 850 µA Op Amps, MSOP-8
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
$CMP MCP6L91RT-EOT
D 10 MHz, 850 µA Op Amps, SOT-23-5
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
$CMP MCP6L91RT-ESN
D 10 MHz, 850 µA Op Amps, SOIC-8
K single opamp
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP MCP6L91T-EOT
D 10 MHz, 850 µA Op Amps, SOT-23-5
K single opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
$CMP MCP6L92
D 10 MHz, 850 µA Op Amps, SOIC-8/MSOP-8
K dual opamp
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
$CMP MCP6L94
D 10 MHz, 850 µA Op Amps, SOIC-14/TSSOP-14
K quad opamp
Added MCP6L91X and MCP6566X
2016-12-29 09:38:01 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/22141b.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP MIC845H
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Micro-Power Comparator / Battery Monitor, Open Drain Output, SC-70-5
K single comparator battery monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/mic845.pdf
$ENDCMP
#
$CMP MIC845L
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Micro-Power Comparator / Battery Monitor, High Input High Output, SC-70-5
K single comparator battery monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/mic845.pdf
$ENDCMP
#
$CMP MIC845N
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Micro-Power Comparator / Battery Monitor, High Input Low Output, SC-70-5
K single comparator battery monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://ww1.microchip.com/downloads/en/DeviceDoc/mic845.pdf
$ENDCMP
#
$CMP NA555
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Timers, DIP-8/SOIC-8/SSOP-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K timer
F http://www.ti.com/lit/ds/symlink/ne555.pdf
$ENDCMP
#
$CMP NA556
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Precision Timers, DIP-14/SOIC-14/SSOP-14
K dual timer
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/se556.pdf
$ENDCMP
#
$CMP NCS210
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Current-Shunt Monitor, Voltage Output, Bi-Directional Zero-Drift, 200V/V Gain, SC-70-6
K Current shunt monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.onsemi.com/pub_link/Collateral/NCS210-D.PDF
$ENDCMP
#
$CMP NCS211
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Current-Shunt Monitor, Voltage Output, Bi-Directional Zero-Drift, 500V/V Gain, SC-70-6
K Current shunt monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.onsemi.com/pub_link/Collateral/NCS210-D.PDF
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP NCV210
D Current-Shunt Monitor, Voltage Output, Bi-Directional Zero-Drift, 200V/V Gain, SC-70-6
K Current shunt monitor
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.onsemi.com/pub_link/Collateral/NCS210-D.PDF
$ENDCMP
#
$CMP NE5532
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Low-Noise Operational Amplifiers, DIP-8/SOIC-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ne5532.pdf
$ENDCMP
#
$CMP NE5534
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Low-Noise Operational Amplifiers, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ne5534.pdf
$ENDCMP
#
$CMP NE555
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Timers, DIP-8/SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K timer
F http://www.ti.com/lit/ds/symlink/ne555.pdf
$ENDCMP
#
$CMP NE556
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Precision Timers, DIP-14/SOIC-14
K dual timer
F http://www.ti.com/lit/ds/symlink/ne556.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP NE567
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Tone Decoder/Phase-Locked Loop, DIP-8/SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K tone decoder PLL
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
F http://www.ti.com/lit/ds/symlink/lm567.pdf
$ENDCMP
#
$CMP NJM2043
D Dual Low Noise Pre-Amplifier, DIP-8/DMP-8/SIP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM2043_E.pdf
$ENDCMP
#
$CMP NJM2114
D Dual High Performance Low Noise Operational Amplifier, DIP-8/DMP-8/SIP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM2114_E.pdf
$ENDCMP
#
$CMP NJM4556A
D Dual High Current Operational Amplifier, DIP-8/DMP-8/SIP-8/SSOP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM4556A_E.pdf
$ENDCMP
#
$CMP NJM4558
D Dual Operational Amplifier, DIP-8/DMP-8/SIP-8/SOP-8/SSOP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM4558_NJM4559_E.pdf
$ENDCMP
#
$CMP NJM4559
D Dual Operational Amplifier, DIP-8/DMP-8/SIP-8/SOP-8/SSOP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM4558_NJM4559_E.pdf
$ENDCMP
#
$CMP NJM4560
D Dual Operational Amplifier, DIP-8/DMP-8/SIP-8/SOP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM4560_E.pdf
$ENDCMP
#
$CMP NJM4580
D Dual Operational Amplifier, DIP-8/DMP-8/SIP-8/MSOP-8/SOP-8/SSOP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM4580_E.pdf
$ENDCMP
#
$CMP NJM5532
D Dual Low-Noise Operational Amplifier, DIP-8/DMP-8/SIP-8
K dual opamp
F http://www.njr.com/semicon/PDF/NJM5532_E.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP OP07
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Ultra-Low Offset Voltage Operational Amplifier, DIP-8/SOIC-8
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP07.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OP179GRT
D Single Rail-to-Rail High Output Current Operational Amplifiers, SOT-23-5
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP179_279.pdf
$ENDCMP
#
$CMP OP179GS
D Single Rail-to-Rail High Output Current Operational Amplifiers, SOIC-8
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP179_279.pdf
$ENDCMP
#
$CMP OP249
D Precision JFET, High Speed, Dual Operational Amplifier, DIP-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP249.pdf
$ENDCMP
#
$CMP OP249GS
D Precision JFET, High Speed, Dual Operational Amplifier, SOIC-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP249.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP OP275
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Bipolar/JFET, Audio Operational Amplifier, DIP-8/SOIC-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP275.pdf
$ENDCMP
#
$CMP OP279
D Dual Rail-to-Rail High Output Current Operational Amplifiers, SOIC-8/TSSOP-8
K dual opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP179_279.pdf
$ENDCMP
#
$CMP OP77
D Next Generation OP07 Ultralow Offset Voltage Operational Amplifier, DIP-8/TO-99-8
K single opamp
F http://www.analog.com/media/en/technical-documentation/data-sheets/OP77.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA134
D Single SoundPlus High Performance Audio Operational Amplifiers, DIP-8/SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/opa134.pdf
$ENDCMP
#
$CMP OPA1622
D High-Fidelity, Bipolar-Input, Audio Operational Amplifier, VSON-10
K dual opamp audio
F http://www.ti.com/lit/ds/symlink/opa1622.pdf
$ENDCMP
#
$CMP OPA2134
D Dual SoundPlus High Performance Audio Operational Amplifiers, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa134.pdf
$ENDCMP
#
$CMP OPA2333xxD
D Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa333.pdf
$ENDCMP
#
$CMP OPA2333xxDGK
D Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, VSSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa333.pdf
$ENDCMP
#
$CMP OPA2333xxDRB
D Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SON-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/opa333.pdf
$ENDCMP
#
$CMP OPA2340
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Single-Supply, Rail-to-Rail Operational Amplifiers, MicroAmplifier Series, DIP-8/SOIC-8/SSOP-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/opa4340.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA2356xxD
D Dual High Speed CMOS Operational Amplifiers, SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa2356.pdf
$ENDCMP
#
$CMP OPA2356xxDGK
D Dual High Speed CMOS Operational Amplifiers, VSSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa2356.pdf
$ENDCMP
#
$CMP OPA2376xxD
D Dual Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA2376xxDGK
D Dual Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, VSSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA2376xxYZD
D Dual Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, DSBGA-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA2691
D Dual Wideband, Current-Feedback Operational Amplifier, SOIC-8
K dual current feedback opamp
F http://www.ti.com/lit/ds/sbos224d/sbos224d.pdf
$ENDCMP
#
$CMP OPA2691-14
D Dual Wideband, Current-Feedback Operational Amplifier With Disable, SOIC-14
K dual current feedback opamp
F http://www.ti.com/lit/ds/sbos224d/sbos224d.pdf
$ENDCMP
#
$CMP OPA2695xD
D Dual, Ultra-Wideband, Current-Feedback Operational Amplifier with Disable, SOIC-8
K dual opamp
Added OPA2695
2017-06-14 17:49:17 +02:00
F http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA2695xRGT
D Dual, Ultra-Wideband, Current-Feedback Operational Amplifier with Disable, QFN-16
K dual opamp
F http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf
$ENDCMP
#
$CMP OPA330xxD
D 50μV V OS, 0.25μV/°C, 35μA CMOS OPERATIONAL AMPLIFIERS, Zerø-Drift Series, SOIC
K single opamp
F http://www.ti.com/lit/ds/symlink/opa330.pdf
$ENDCMP
#
$CMP OPA330xxDBV
D 50μV V OS, 0.25μV/°C, 35μA CMOS OPERATIONAL AMPLIFIERS, Zerø-Drift Series, SOT
K single opamp
F http://www.ti.com/lit/ds/symlink/opa330.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA330xxDCK
D 50μV V OS, 0.25μV/°C, 35μA CMOS OPERATIONAL AMPLIFIERS, Zerø-Drift Series, SC70
K single opamp
F http://www.ti.com/lit/ds/symlink/opa330.pdf
$ENDCMP
#
$CMP OPA330xxYFF
D 50μV V OS, 0.25μV/°C, 35μA CMOS OPERATIONAL AMPLIFIERS, Zerø-Drift Series, DSBGA
K single opamp
F http://www.ti.com/lit/ds/symlink/opa330.pdf
$ENDCMP
#
$CMP OPA333xxD
D Single 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/opa333.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA333xxDBV
D Single 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SOT-23-5
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/opa333.pdf
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA333xxDCK
D Single 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SC-70-5
K single opamp
F http://www.ti.com/lit/ds/symlink/opa333.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA340NA
D Single Single-Supply, Rail-to-Rail Operational Amplifier, MicroAmplifier Series, SOT-23-5
K single opamp
F http://www.ti.com/lit/ds/symlink/opa340.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP OPA340P
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Single-Supply, Rail-to-Rail Operational Amplifier, MicroAmplifier Series, DIP-8
K single opamp
F http://www.ti.com/lit/ds/symlink/opa340.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA340UA
D Single Single-Supply, Rail-to-Rail Operational Amplifier, MicroAmplifier Series, SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/opa340.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA356xxD
D Single High Speed CMOS Operational Amplifier, SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/opa356.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP OPA356xxDBV
D Single High Speed CMOS Operational Amplifier, SOT-23-5
K single opamp
F http://www.ti.com/lit/ds/symlink/opa356.pdf
$ENDCMP
#
$CMP OPA376xxD
D Single Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA376xxDBV
D Single Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, SOT-23-5
K single opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA376xxDCK
D Single Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, SC-70-5
K single opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA4134
D Quad SoundPlus High Performance Audio Operational Amplifiers, SOIC-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/opa134.pdf
$ENDCMP
#
$CMP OPA4340EA
D Quad Single-Supply, Rail-to-Rail Operational Amplifier, MicroAmplifier Series, SSOP-16
K quad opamp
F http://www.ti.com/lit/ds/symlink/opa340.pdf
$ENDCMP
#
$CMP OPA4340UA
D Quad Single-Supply, Rail-to-Rail Operational Amplifier, MicroAmplifier Series, SOIC-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/opa340.pdf
$ENDCMP
#
$CMP OPA4376
D Quad Low-Noise, Low Quiescent Current, Precision Operational Amplifier e-trim Series, SC-70-5
K quad opamp
F http://www.ti.com/lit/ds/symlink/opa376.pdf
$ENDCMP
#
$CMP OPA890ID
D Single Low-Power, Wideband, Voltage-Feedback Operational Amplifier with Disable, SOT-23-6
K single opamp wideband low-power
F https://www.ti.com/lit/ds/symlink/opa890.pdf
$ENDCMP
#
$CMP RC4558
D Dual General Purpose, Operational Amplifier, DIP-8/SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/rc4558.pdf
$ENDCMP
#
$CMP RC4560
D Dual Audio Operational Amplifier, DIP-8/SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/rc4560.pdf
$ENDCMP
#
$CMP RC4580
D Dual Audio Operational Amplifier, SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/rc4580.pdf
$ENDCMP
#
$CMP SA5532
D Dual Low-Noise Operational Amplifiers, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/ne5532.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP SA5534
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Low-Noise Operational Amplifiers, DIP-8/SOIC-8
K single opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/ne5534.pdf
$ENDCMP
#
$CMP SA555
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Timers, DIP-8/SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K timer
F http://www.ti.com/lit/ds/symlink/ne555.pdf
$ENDCMP
#
$CMP SA556
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Precision Timers, DIP-14/SOIC-14
K dual timer
F http://www.ti.com/lit/ds/symlink/ne556.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP SE555
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Precision Timers, DIP-8/SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K timer
F http://www.ti.com/lit/ds/symlink/ne555.pdf
$ENDCMP
#
$CMP SE556
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Precision Timers, DIP-14/SOIC-14
K dual timer
F http://www.ti.com/lit/ds/symlink/ne556.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP SE567
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Tone Decoder/Phase-Locked Loop, DIP-8/SOIC-8
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
K tone decoder PLL
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
F http://www.ti.com/lit/ds/symlink/lm567.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
THS4631D
2017-05-30 11:14:40 +02:00
$CMP THS4631D
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single High-voltage, High Slew Rate, Wideband, FET-input Operational Amplifier, SOIC-8
K single opamp
F www.ti.com/lit/ds/symlink/ths4631.pdf
$ENDCMP
#
$CMP THS4631DDA
D Single High-voltage, High Slew Rate, Wideband, FET-input Operational Amplifier, SOIC-8
K single opamp
F www.ti.com/lit/ds/symlink/ths4631.pdf
$ENDCMP
#
$CMP THS4631DGN
D Single High-voltage, High Slew Rate, Wideband, FET-input Operational Amplifier, MSOP-8
K single opamp
THS4631D
2017-05-30 11:14:40 +02:00
F www.ti.com/lit/ds/symlink/ths4631.pdf
$ENDCMP
#
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$CMP TL061
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Low-Power JFET-Input Operational Amplifiers, DIP-8/SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/tl061.pdf
$ENDCMP
#
$CMP TL062
D Dual Low-Power JFET-Input Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/tl061.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL064
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad Low-Power JFET-Input Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/tl061.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL071
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
K singel opamp
F http://www.ti.com/lit/ds/symlink/tl071.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL072
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/tl071.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL074
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/tl071.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL081
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Single JFET-Input Operational Amplifiers, DIP-8/SOIC-8
K single opamp
F http://www.ti.com/lit/ds/symlink/tl081.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL082
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual JFET-Input Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/tl081.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TL084
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad JFET-Input Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/tl081.pdf
$ENDCMP
#
$CMP TL3116
D Single Ultra-Fast Low-Power Precision Comparators, SOIC-8/SSOP-8
K single comparator
F http://www.ti.com/lit/ds/symlink/tl3116.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
$CMP TLC272
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual LinCMOS Precision Dual Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F http://www.ti.com/lit/ds/symlink/tlc272.pdf
$ENDCMP
#
$CMP TLC274
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Quad LinCMOS Precision Quad Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/tlc274.pdf
$ENDCMP
#
$CMP TLC277
D Dual LinCMOS Precision Dual Operational Amplifiers, DIP-8/SOIC-8/SSOP-8
K dual opamp
F http://www.ti.com/lit/ds/symlink/tlc272.pdf
$ENDCMP
#
$CMP TLC279
D Quad LinCMOS Precision Quad Operational Amplifiers, DIP-14/SOIC-14/SSOP-14
K quad opamp
F http://www.ti.com/lit/ds/symlink/tlc274.pdf
$ENDCMP
#
$CMP TLC555CD
D Single LinCMOS Timer, SOIC-8
K single timer
F http://www.ti.com/lit/ds/symlink/tlc555.pdf
$ENDCMP
#
$CMP TLC555CP
D Single LinCMOS Timer, DIP-8
K single timer
F http://www.ti.com/lit/ds/symlink/tlc555.pdf
$ENDCMP
#
$CMP TLC555CPS
D Single LinCMOS Timer, SSOP-8
K single timer
F http://www.ti.com/lit/ds/symlink/tlc555.pdf
$ENDCMP
#
$CMP TLC555CPW
D Single LinCMOS Timer, TSSOP-14
K single timer
F http://www.ti.com/lit/ds/symlink/tlc555.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP TS881xCx
D Rail-to-rail 0.9 V nanopower comparator, SC-70-5
K single comparator
F http://www.st.com/content/ccc/resource/technical/document/datasheet/a2/60/3e/5d/b2/c1/4a/e9/DM00057901.pdf/files/DM00057901.pdf/jcr:content/translations/en.DM00057901.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP TS881xLx
D Rail-to-rail 0.9 V nanopower comparator, SOT-23-5
K single comparator
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
F www.st.com/resource/en/datasheet/ts881.pdf
$ENDCMP
#
$CMP TS912
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
D Dual Rail-to-rail CMOS Operational Amplifier, DIP-8/SOIC-8
K dual opamp
F www.st.com/resource/en/datasheet/ts912.pdf
$ENDCMP
#
$CMP TSV911IDT
D Single rail-to-rail input/output 8 MHz operational amplifiers, SOIC-8
K single opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV911RILT
D Single rail-to-rail input/output 8 MHz operational amplifiers, SOT-23-5
K single opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV911xxLx
D Single rail-to-rail input/output 8 MHz operational amplifiers, SOT-23-5
K single opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV912IDT
D Dual rail-to-rail input/output 8 MHz operational amplifiers, SOIC-8
K dual opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV912IQ2T
D Dual rail-to-rail input/output 8 MHz operational amplifiers, DFN-8
K dual opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV912IST
D Dual rail-to-rail input/output 8 MHz operational amplifiers, MiniSO-8
K dual opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP TSV914
D Quad rail-to-rail input/output 8 MHz operational amplifiers, SOIC-14/TSSOP-14
K quad opamp
F www.st.com/resource/en/datasheet/tsv911.pdf
$ENDCMP
#
$CMP ZXCT1009F
D High-Side Current Monitor, SOT-23
K High side current monitor shunt
F https://www.diodes.com/assets/Datasheets/ZXCT1009.pdf
$ENDCMP
#
$CMP ZXCT1009T8
D High-Side Current Monitor, SM8
K High side current monitor shunt
F https://www.diodes.com/assets/Datasheets/ZXCT1009.pdf
$ENDCMP
#
$CMP ZXCT1107
D Low Power High-Side Current Monitors, SOT-23
K High side current monitor shunt
F https://www.diodes.com/assets/Datasheets/ZXCT1107_10.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP ZXCT1109
D Low Power High-Side Current Monitors, SOT-23
K High side current monitor shunt
F https://www.diodes.com/assets/Datasheets/ZXCT1107_10.pdf
adding TSV911
2017-02-22 12:54:39 +01:00
$ENDCMP
#
Merging from Master (#7) * reworked MAX77x (datasheet, symbol, missing variants, description ..) * reworked MC33063-family (symbol, missing variants, footprints, description, ...) * reworked MC34063 family as alias to MC33063 family * reworked MCP16301 (symbol, pin-type, description) * reworked MCP16311/2 (symbol, description, name without -, ...) * reworked MCP16331 (symbol, pin-type, naming without -...) * reworked MCP1640 family (symbol, naming wiothout -, ...) * corrected some descriptions * reworked MCP165x family (symbol, description) * reworked MIC2177 (datasheet, symbol, pin-stacks, description...) * added fixed-output variants of MIC2177 * added MIC2178 family * reworked MIC4690 (stacked-pins, symbol, description...) * reworked NID60-series (symbol, stacked-pins, footprint, FPFilter, description) added NID30-series (footprint available from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/25) * reworked NMAxxyyDC/SC-series (symbol, isolation bars, ...) * reworked NXE2-series (NC-pin location, description, ...) * reworked PAM2305 series (missing variants, symbols, description...) * removed very obsolete PT6100 (no footprint, no description available anymore ...) * reworked R-78E-series (description) * Added 3D models for ZETA-433-SO * Added Foot print name * Added Foot print name * reworked R78-Zxx-yy series from RECOM (symbol, added missing variants, footprints from https://github.com/KiCad/Converters_DCDC_ACDC.pretty/pull/26) * Updated description of 868 and 915 MHz * Made fields invisible * reworked ST1CC40 (symbol, package-variants, wrong pinout and package, description, ...) * Add Johansen chip antenna * Add symbol for MAX6971 LED driver. http://datasheets.maximintegrated.com/en/ds/MAX6971.pdf * Move Parallax Propeller to its own library. * The DIP version of the Propeller has two VDD pins and two VSS pins. * reworked ST1S10 family (footprints, description, symbols...) * reworked ST1S14PHR (symbol, missing PAD-pin, footprint, description, ...) * reworked Traco TEN20-series (symbol, isolation barrier, pin-position, description, ...) * reworked TL497 family (symbol, pin-types, description, FPFilters, ...) * reworked TMR_1 series (description...) * reworked TPS5431 (missing NCs, pin-types, description, footprint from https://github.com/KiCad/Housings_SOIC.pretty/pull/35...) * reworked TPS54340/TPS54360 (footprint, pin-types, description...) * reworked TPS560200 (description, ...) * reworked TPS56x200 (description, ...) * reworked TPS6050xDGS (pin-types, description, FPFilter, ...) * reworked TPS6120x (symbol, pin-location, description, footpritns, see https://github.com/KiCad/Housings_SON.pretty/pull/19) * reworked TPS621xy families (dscription, missing variants) * Removed Antenna.lib, added Antenna_Chip to device.lib * reworked TPS62xyz (missing variants, footprints, FPFilters, split by package, symbol, pin-types, description, ...) * added scripted Wuerth Mapi inductor models * reworked TPS6217xDQC (description, footprint from https://github.com/KiCad/Housings_SON.pretty/pull/20 ...) * added description to TPS62175DQC * reworked TPS6220xDBV (symbol, description, ...) * reworked TSR-1 series (description, symbol, ...) * fixed some KLC issues * reworked ADG729 * added ADG728 * removed CPC1017N which is already in opto.lib * Changed Antenna_Chip to use a resonator symbol * reworked DG308/DG309/DG441/DG442 * Fix naming for Schurter FUP 3d models. * Reduce pin length, text offset and body width of MCP45HVx1. * FRSolutions: Add the Particle P1 WiFi module * rfcom: Update footprint of ESP-12E * rfcom: Update footprint of ESP-12E * moved symbols from texas.lib and siliconi.lib to analog_switches.lib * Copy connector shape from USB_OTG to USB_B_Micro. I recently added the USB_B_Micro symbol (and an alias, USB_B_Mini). I hadn't noticed that there was already a similar USB_OTG symbol. However, the two need to remain separate, because USB_OTG has VBUS and GND marked as power inputs, while USB_B_Micro has them as power outputs. This commit makes USB_B_Micro identical to USB_OTG, except for the direction of the power pins. Specifically, it copies the connector shape from USB_OTG to USB_B_Micro. (I had been too lazy to draw the connector shape when I created USB_B_Micro.) * added missing NC-pins fixed naming added DG411/DG412/DG413 family * Added FAN3268 to ON Semiconductor library. * added DG417/DG418/DG419 and its variants ADG417/ADG419, MAX317/MAX318/MAX319 * corrected label location * Added 3D models for SW_SP3T_PCM13 and SW_SPDT_PCM12 * added DG417L/DG418L/DG419L fixed several minor issues (typos, wrong symbols, ...) * Combined bosch.lib and Bosch.lib * Don't update library version * RFSolutions: Rename P1 to Particle_P1 * LED: Add CLV1L-FKB * LED: CLV1L-FKB remove trademark symbol from description * fixed several swicthes (wrong normally settings) + added DG41x-variants from Maxim and other companies, as Maxim does not have the separate Vlogic pin! * added/reworked DG9421/DG9422 (package posted as https://github.com/KiCad/Housings_SSOP.pretty/pull/51) * reworked DG884 * Added name of package to description (FAN3268) * reworked FSA3157/NC7SB3157 (symbol, ...footprint from https://github.com/KiCad/Housings_SON.pretty/pull/21) * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * reworked TS5A3159/TS5A3160 (split by footprint, added missing variants, description, symbol, footprint from https://github.com/KiCad/Housings_BGA.pretty/pull/26) * rework HI524 (symbol, description, datasheet, footprint) * moved LCC110 to opto.lib and reworked symbol (footprint, symbol, ...) * moved LAA110, LB110 from analog_switches to opto.lib and reimplemented as ALIAS * added MAX312/313/314 family as ALIASes * added MAX323/324/325 series * fixed KLC issues (font-size, wrong FPFilters) * #IM fixed power-pin stack * update LTC2309 stack GND and VDD pins allowing for same schematic on both chips. Minor changes to adhere to KLC. * Added 3D models for dip switches * Updated according to PR feedback * Add TDA1308 Schematic library for the class-AB stereo headphone driver by NXP Signed-off-by: Adam Heinrich <adam@adamh.cz> * Rename Cortex Debug Connector, add FP filter - Renamed Cortex Debug Connector from `Conn_ARM_Cortex-Debug` to `CMP Conn_ARM_JTAG_SWD_10` - Added FP filter `Conn*:*_2x*` for KiCad v5 * Oscillators: Add SG3030CM * Removed CVS type * Removed CVS type * Updated leg and pad size * pspice: Add MOSFET symbols * Add cross 4p net tie * Add cross 4p net tie * Add symbol LED_BGRA. This is the pinout used by "Piranha" RGB LEDs. See that pull request for more information. * Add "LED*" footprint filter to LED symbols in "device" library. Also: * Added "~" datasheet to LED symbols to suppress KLC errors. * Corrected cases where fields 2 and 3 were not invisible. Did not attempt to correct other pre-existing KLC errors. (Pin placement.) * move symbol and package name, add potentiometer symbol inside. * Move footprint name more to the right. * Oscillators: Fix pin offset in SG-3030CM * Separate power pins on generic opamps * Update generic opamps symbols * Add x cap discharge ICs * Add x cap discharge ICs * Oscillators: Rename SG3030CM footprint to comply with KLC * Add TI OPA356 and OPA2356 operational amplifiers They use the same pinout as existing devices, so they are just new aliases. * Update atmel.lib * Added 3d part for Bosch LGA-8_2.5x2.5mm_Pitch0.65mm package, BME280 and BME680 * Corrected vent hole position, corrected marker pad position, pad numbering starts clockwise from right side * MCU_Texas_MSP430: fix G2553 * Update fp-lib-table.for-github * Update fp-lib-table.for-pretty * Update fp-lib-table.for-pretty * Update fp-lib-table.for-github * Add TI OPA1622 operational amplifier * - removed unneeded D-SUB 3D models - moved bornierXX 3D models * renamed bornier 3D models * - moved Phoenix 3D models to correct location * fixed D-SUB FPFilters for new footprints * revert DSUB-fixes (will do separately) * Added the Analog Devices ADP2302ARDZ * visual enhancements as requested * Added the Microchip MCP1825S 500mA LDO Regulator * Update net ties * Update net ties * Fixed keywords, modified pin name offset, fixed pin type (FAN3268). * Clearing an error in STM32L071/STM32L072 loading libs * Add PD70224 * Add PD70224 * Fixed dot location * Add "T" 3-pin net tie * Add "T" 3-pin net tie * Remove duplicated polylines in net ties * Removed the errored lines altogether. * Add OPA890 operational amplifier in SOT23-6 package * Add Allegro current sensors * Updated sym_lib_table file * Added TJA1052i * Added Alias Alias for different isolation voltages * Set pointing * Added isolation lines * Replaced illegal character * fix sym-lib-table typos ang missing Logic_ prefixes * added LSM303C and LSM6DS3 * Fix footprint filter * hopefully final fixups * MCU_Texas_MSP430: update keywords * MCU_Texas_MSP430: update description - do not duplicate part name (KLC 3.0.2 S6.3) - append simplified footprint name (KLC 3.0.2 S6.3) * MCU_Texas_MSP430: update documentation file Always use a symlink based on the actual part number, even if multiple devices share the same data sheet. * Added better descriptions for symbol libraries * Add TPS2592xx Schematic library for the 5V/12V eFuse protection switch by TI Signed-off-by: Adam Heinrich <adam@adamh.cz> * Moved nc pins and made them visible * Fixed Stacking & Naming * Add TPS22929D power distribution switch * - adjusted names of the symbols to the new KLC * Added TPS61090, TPS61091, and TPS61092 boost converters. * added TPD3E001DRLR TPD2E2U06 * updated to resolve jenkins issues * Updated to address automated script issues * Fixed additional errors * Fixed ground pin alignment * Updated footprint * Microchip: SY89312V 3.3/5V, ECL/PECL 4GHz x2 clock divider Documentation: http://ww1.microchip.com/downloads/en/DeviceDoc/sy89312v.pdf * fixed library version to make these workable with KiCAD 4.0.7 (see https://github.com/KiCad/kicad-library/issues/1838) * removed whiteline that lead to error * changed model name as per footprint, rotated 90 degree CCW, ofset 0,0,0 * Add Analog Devices ADP5070/5071 switching regulators * Adjusted the PIC12 symbol names to the new KLC * Changed pin order * fixed several issues in transistors.lib/dcm: - unified naming/description - fixed some packages (e.g. TO-220-variants had wrong names) - fixed wrong BF245/244 symbols (https://github.com/KiCad/kicad-library/issues/1843#issuecomment-345438714) - added BF545 - added some missing datasheets * Removed unnecessary changes to rest of the file * - removed non-existent device from DCM (that device really is not produced!) - fixed one description (package type) * Update .travis.yml Remove sudo requirement
2017-11-21 08:48:35 +01:00
$CMP ZXCT1110
D Low Power High-Side Current Monitors, SOT-23-5
K High side current monitor shunt
F https://www.diodes.com/assets/Datasheets/ZXCT1107_10.pdf
Fixed line endings for .lib files
2017-02-09 12:27:25 +01:00
$ENDCMP
#
#End Doc Library
Reference in a new issue Copy permalink