Neue Einstellungen für ersten Layer

print/ChCh Default.ini

@@ -1,86 +1,131 @@
-# generated by Slic3r 1.2.9 on Sun Jul 30 01:33:47 2017
+# generated by Slic3r 1.2.9 on Mon Oct  9 20:52:41 2017
-avoid_crossing_perimeters = 1
+avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bed_shape = 0x0,200x0,200x200,0x200
-bridge_acceleration = 0
+bed_temperature = 100
-bridge_flow_ratio = 1
+before_layer_gcode = 
-bridge_speed = 60
+bottom_solid_layers = 3
-brim_width = 3
+bridge_acceleration = 0
-complete_objects = 0
+bridge_fan_speed = 100
-default_acceleration = 0
+bridge_flow_ratio = 1
-dont_support_bridges = 0
+bridge_speed = 60
-external_fill_pattern = rectilinear
+brim_width = 8
-external_perimeter_extrusion_width = 0
+complete_objects = 1
-external_perimeter_speed = 50%
+cooling = 0
-external_perimeters_first = 1
+default_acceleration = 0
-extra_perimeters = 1
+disable_fan_first_layers = 1
-extruder_clearance_height = 20
+dont_support_bridges = 1
-extruder_clearance_radius = 20
+duplicate_distance = 6
-extrusion_width = 0
+end_gcode = M140 S0 ; turn off bed\nM104 S0 ; turn off extruder\nG28 X0 Y200 ; home X axis\nM84 ; disable motors
-fill_angle = 45
+external_fill_pattern = rectilinear
-fill_density = 25%
+external_perimeter_extrusion_width = 104%
-fill_pattern = rectilinear
+external_perimeter_speed = 50%
-first_layer_acceleration = 0
+external_perimeters_first = 0
-first_layer_extrusion_width = 0
+extra_perimeters = 1
-first_layer_height = 0.25
+extruder_clearance_height = 25
-first_layer_speed = 30
+extruder_clearance_radius = 25
-gap_fill_speed = 80
+extruder_offset = 0x0
-gcode_comments = 0
+extrusion_axis = E
-infill_acceleration = 0
+extrusion_multiplier = 0.85
-infill_every_layers = 1
+extrusion_width = 0
-infill_extruder = 1
+fan_always_on = 0
-infill_extrusion_width = 0
+fan_below_layer_time = 60
-infill_first = 0
+filament_colour = #FF0000
-infill_only_where_needed = 1
+filament_diameter = 1.75
-infill_overlap = 15%
+fill_angle = 45
-infill_speed = 75
+fill_density = 20%
-interface_shells = 0
+fill_pattern = honeycomb
-layer_height = 0.1
+first_layer_acceleration = 0
-max_print_speed = 100
+first_layer_bed_temperature = 100
-max_volumetric_speed = 0
+first_layer_extrusion_width = 200%
-min_skirt_length = 0
+first_layer_height = 0.35
-notes = 
+first_layer_speed = 20
-only_retract_when_crossing_perimeters = 1
+first_layer_temperature = 225
-ooze_prevention = 0
+gap_fill_speed = 20
-output_filename_format = [input_filename_base].gcode
+gcode_arcs = 0
-overhangs = 1
+gcode_comments = 0
-perimeter_acceleration = 0
+gcode_flavor = reprap
-perimeter_extruder = 1
+infill_acceleration = 0
-perimeter_extrusion_width = 0
+infill_every_layers = 1
-perimeter_speed = 60
+infill_extruder = 1
-perimeters = 5
+infill_extrusion_width = 0
-post_process = 
+infill_first = 0
-raft_layers = 0
+infill_only_where_needed = 0
-resolution = 0
+infill_overlap = 15%
-seam_position = aligned
+infill_speed = 80
-skirt_distance = 0
+interface_shells = 0
-skirt_height = 1
+layer_gcode = 
-skirts = 5
+layer_height = 0.3
-small_perimeter_speed = 75%
+max_fan_speed = 100
-solid_infill_below_area = 70
+max_print_speed = 80
-solid_infill_every_layers = 50
+max_volumetric_speed = 0
-solid_infill_extruder = 1
+min_fan_speed = 35
-solid_infill_extrusion_width = 0
+min_print_speed = 10
-solid_infill_speed = 100%
+min_skirt_length = 0
-spiral_vase = 0
+notes = 
-standby_temperature_delta = -5
+nozzle_diameter = 0.5
-support_material = 1
+octoprint_apikey = A87755CDCC77441C8A222A60F0AE45A5
-support_material_angle = 5
+octoprint_host = 172.23.92.13
-support_material_contact_distance = 0.2
+only_retract_when_crossing_perimeters = 1
-support_material_enforce_layers = 0
+ooze_prevention = 0
-support_material_extruder = 1
+output_filename_format = [input_filename_base].gcode
-support_material_extrusion_width = 0
+overhangs = 1
-support_material_interface_extruder = 1
+perimeter_acceleration = 0
-support_material_interface_layers = 3
+perimeter_extruder = 1
-support_material_interface_spacing = 3
+perimeter_extrusion_width = 102%
-support_material_interface_speed = 50%
+perimeter_speed = 40
-support_material_pattern = rectilinear-grid
+perimeters = 3
-support_material_spacing = 3
+post_process = 
-support_material_speed = 80
+pressure_advance = 0
-support_material_threshold = 0
+raft_layers = 0
-thin_walls = 1
+resolution = 0
-threads = 2
+retract_before_travel = 5
-top_infill_extrusion_width = 0
+retract_layer_change = 0
-top_solid_infill_speed = 50%
+retract_length = 4
-top_solid_layers = 4
+retract_length_toolchange = 10
-travel_speed = 150
+retract_lift = 0
-xy_size_compensation = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = M140 S[first_layer_bed_temperature] ; set bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM190\nM109
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 225
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 15
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0