neue Datei: ChCh ABS.ini

neue Datei:     Print.ini
	neue Datei:     Printer.ini

ChCh ABS.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Sun Jul 30 01:32:55 2017
+bed_temperature = 90
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 0.85
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FF0000
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 225
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 30
+temperature = 225

Print.ini

@@ -0,0 +1,131 @@
+# generated by Slic3r 1.2.9 on Mon Oct  9 20:52:41 2017
+avoid_crossing_perimeters = 0
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 100
+before_layer_gcode = 
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 8
+complete_objects = 1
+cooling = 0
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M140 S0 ; turn off bed\nM104 S0 ; turn off extruder\nG28 X0 Y200 ; home X axis\nM84 ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 104%
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 25
+extruder_clearance_radius = 25
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 0.85
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FF0000
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 20%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_bed_temperature = 100
+first_layer_extrusion_width = 200%
+first_layer_height = 0.35
+first_layer_speed = 20
+first_layer_temperature = 225
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 80
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+max_print_speed = 80
+max_volumetric_speed = 0
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+octoprint_apikey = A87755CDCC77441C8A222A60F0AE45A5
+octoprint_host = 172.23.92.13
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 102%
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+pressure_advance = 0
+raft_layers = 0
+resolution = 0
+retract_before_travel = 5
+retract_layer_change = 0
+retract_length = 4
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = M140 S[first_layer_bed_temperature] ; set bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM190\nM109
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 225
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 15
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+xy_size_compensation = 0
+z_offset = 0

Printer.ini

@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Sun Jul 30 02:01:41 2017
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+end_gcode = M140 S0 ; turn off bed\nM104 S0 ; turn off extruder\nG28 X0 Y200 ; home X axis\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+octoprint_apikey = A87755CDCC77441C8A222A60F0AE45A5
+octoprint_host = 172.23.92.13
+pressure_advance = 0
+retract_before_travel = 5
+retract_layer_change = 0
+retract_length = 4
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M140 S[first_layer_bed_temperature] ; set bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM190\nM109
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0